Yamaha SY99 Скачать руководство пользователя страница 226 | Manualshive

Страница: 226 / 344

Yamaha SY99 Скачать руководство пользователя страница 226

SONG MODE

Summary: This operation allows you to cut a song

in two, creating two shorter songs from one long
song.

Procedure:

From: song edit job directory 1 ( JUMP #600)

Select: 02:Cut Song (JUMP #602)

Specify: the song to be cut, the measure at

which it is to be cut, and the song
number to which the cut portion is to
be copied.

To execute: press ENTER.

To quit: without executing, press EXIT.

Source (1...10): Specify the song to be cut.
Measure (1...999): Specify the measure at
which the song in is to be cut. This measure
and all measures following it will be cut from the
source song and copied to the destination song
location.
Destination (1...10): Specify the song number to
which the cut portion is to be moved.

Remarks: The cut song operation cuts the specified

measure and all following measures from the

source song and moves them to the destination
song. The tempo, transmit channels, next song,

next mode, and song name for the destination

song will be the same as those set for the
source song.

If the destination song is already occupied by

song data, this data will be erased by the cut
operation. Before executing the cut song opera-
tion, always check to be certain that the desti-

nation song does not contain data you wish to
keep.

Errors: An attempt to cut a song will result in an

error under any of the following conditions:

When there is not sufficient sequencer

memory to perform the cut operation.
When the same song is specified as both the
source and destination.
When the song cannot be cut at the specified
measure. The measure specification is sub-

It should

ject to the following limitations:

not be located after the end of the song data.

It should not be located within a pattern;

that is, the specified measure should always

It should

be the first measure of a pattern.
not be located within a loop (i.e., between
repeat marks) in the pattern chain.

Summary: This operation allows you to make a

copy of a song.

Procedure:

From: song edit job directory 1 (JUMP #600)

Select: 03:Copy Song

(JUMP #603)

Specify: the song to be copied, and the song

number to which it is to be copied.

To execute: press ENTER.

To quit: without executing, press EXIT.

Source (1...10): Specify the song to be copied.
Destination (1...10): Specify the song number to
which the song in is to be copied.

2 1 5

SONG EDIT JOBS 1

2. Cut song

JUMP #602

SONG EDIT JOBS 1

3. Copy song

JUMP #603

«
...
224
225
226
227
228
...
»

Содержание SY99

























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды