Reference Manual
Reference
61
Name
Play Mode
Arpeggio
Controller
Filter/EG
3 Band EQ
Reverb Send (Key Reverb Send)
Determines the level of the Drum Key sound (the bypassed signal) that is sent to Reverb effect. The setting here is
available only when the “Ins Effect Output” parameter is set to “thru.” This parameter is same as Reverb Send (
in the Effect section in Drum Voice Common Edit. Making a setting here automatically changes the setting of that
parameter as well.
Settings:
0 – 127
Chorus Send (Key Chorus Send)
Determines the level of the Drum Key sound (the bypassed signal) that is sent to Chorus effect. The setting here is
available only when the “Ins Effect Output” parameter is set to “thru.” This parameter is same as Chorus Send (
in the Effect section in Drum Voice Common Edit. Making a setting here automatically changes the setting of that
parameter as well.
Settings:
0 – 127
Output Select
Determines the specific output(s) for the individual Drum key signal. You can assign each individual Drum Key sound to
be output from a specific hardware output jack on the rear panel. This function is useful when you wish to apply a
connected external effect to a specific drum instrument. The setting here is available only when the “Ins Effect Output”
parameter is set to “thru.”
Settings:
For details, refer to the “Output Select List” (
) of the Supplementary information.
Coarse (Coarse Tuning)
Determines the pitch of each Drum Key in semitones.
Settings:
-48semi – +0semi – +48semi
Fine (Fine Tuning)
Determines the pitch of each Drum Key in cents.
Settings:
-64cent – +0cent – +63cent
Vel Sens (Pitch Velocity Sensitivity)
Determines how the pitch of the Drum Key responds to velocity. Positive settings will cause the pitch to rise the more
strongly you play the keyboard and negative settings will cause it to fall. A setting of 0 will cause the pitch not to change.
Negative settings will cause the pitch to rise the more softly you play the keyboard.
Settings:
-64 – +0 – +63
Cutoff
Raises or lowers the cutoff frequency of the low pass filter to adjust the tone brilliance. The sound can be brightened by
raising the cutoff frequency, and darkened or muffled by lowering it.
Settings:
0 – 255
Cutoff Vel Sens (Cutoff Velocity Sensitivity)
Determines how the Cutoff Frequency responds to velocity, or the strength with which you play notes. Positive settings
will cause the Cutoff Frequency to rise the harder you play the keyboard. A setting of 0 will cause the Cutoff Frequency
not to change depending on velocity. Negative settings will cause the Cutoff Frequency to rise the more softly you play
the keyboard.
Settings:
-64 – +0 – +63
Resonance
Determines the emphasis given to the Cutoff Frequency to add further character to the sound. Higher values result in a
more pronounced effect. This can be used in combination with the cutoff frequency parameter to add further character
to the sound.
Settings:
0 – 127
Tune
Filter Type
