104
En
Graphical user interface (GUI) menu
When “Zone2 Volume” or “Zone3 Volume” is set to “Fixed”,
you cannot select the following parameters:
– Zone2 Max Vol./Zone3 Max Vol.
– Zone2 Initial Vol./Zone3 Initial Vol.
Zone2 Max Vol./Zone3 Max Vol.
(Zone 2/Zone 3 Maximum volume setting)
Use this feature to set the maximum volume level in the
Zone 2 or Zone 3.
Control range: –30.0 dB to +15 .0 dB,
+16.5 dB
Control step: 5.0 dB
The “Zone2 Max Vol.” or “Zone3 Max Vol.” setting takes
priority over the “Zone2 Initial Vol.” or “Zone3 Initial Vol.”
setting.
Zone2 Initial Vol./Zone3 Initial Vol.
(Zone 2/Zone 3 initial volume setting)
Use this feature to set the volume level of Zone 2 or Zone
3 when the power of each zone is turned on.
Control range:
Off
, Mute, –80.0 dB to +16.5 dB
Control step: 0.5 dB
The “Zone2 Max Vol.” or “Zone3 Max Vol.” setting takes
priority over the “Zone2 Initial Vol.” or “Zone3 Initial Vol.”
setting.
Zone2 Balance/Zone3 Balance
(Zone 2/Zone 3 balance)
Use this feature to adjust the balance of the volume of the
left and right channels in each zone.
Choices: L10 to L1,
0
, R1 to R10
Zone2 Tone Control/Zone3 Tone Control
(Zone 2/Zone 3 tone control)
Use this feature to adjust the balance of bass and treble
output to the selected zone.
Choices: Bass (Bass control), Treble (Treble control)
Control range: –10.0 dB to +10.0 dB
Initial setting: 0.0 dB
Zone2 Mono/Zone3 Mono
(Zone 2/Zone 3 monaural mode)
Use this feature to select whether you play back sources
monaurally in the selected zone.
Zone2 Muting Type/Zone3 Muting Type
(Zone 2/Zone 3 muting type)
Use this feature to adjust how much the mute function
reduces the output volume of the selected zone.
■
Zone OSD (Zone on-screen display)
Use this feature to display the operational status of Zone 2,
Zone 3, and Zone 4 on the Zone 2 video monitor
connected to the ZONE VIDEO jacks on the rear panel of
this unit.
■
Zone Rename (Zone Rename)
Main/Zone2/Zone3/Zone4
(Main/Zone 2/Zone 3/Zone 4 rename)
Use this feature to edit the name of the selected zone.
1
Press
9
k
/
n
/
l
/
h
to select a character or
function and then press
9
ENTER
to
confirm the selection.
Repeat step 1 until you input a name you want to use.
2
Press
9
k
/
n
/
l
/
h
to select “SAVE” and
then press
9
ENTER
.
y
• To reset the name, select “RESET” and then press
9
ENTER
.
• To cancel the operation without change, select
“CANCEL” and then press
9
ENTER
.
Note
Note
Note
Choice
Descriptions
Off
Turns off the monaural playback mode. This
unit plays back sources in stereo.
On
Turns on the monaural playback mode. This unit
mixes down the left and right channel signals
and plays the sources monaurally.
Choice
Functions
Full
Mutes all the audio output.
–20dB
Reduces the current volume by 20 dB.
–40dB
Reduces the current volume by 40 dB.
Choice
Functions
Off
Turns off the zone on-screen display feature.
Zone2
Displays the operational status of Zone 2 only.
All
Displays the operational status of Zone 2, Zone
3 and Zone 4.
