63
En
XM® Satellite Radio tuning
BA
S
IC
OPERA
T
ION
■
Preset Search mode
Prior to selecting a preset channel in the Preset Search
mode, you must preset XM Satellite Radio channels. For
details, see “Setting the XM Satellite Radio preset
channels” (page 63).
1
Press
G
SEARCH MODE
(or
I
SRCH
MODE
) repeatedly to select “PRESET
SEARCH”.
2
Press
I
CATEGORY
(or
9
A-E/CAT.
l
/
h
)
repeatedly to change the preset channel
group (A to E).
3
Press
E
PRESET/TUNING/CH
l
/
h
(or
9
PRESET/CH
k
/
n
) repeatedly to change
the preset channel number (1 to 8).
y
You can also select the preset channel number directly by
pressing the numeric buttons (1 to 8) (
B
).
■
Direct number access mode
1
Press
I
SRCH MODE
on the remote control
repeatedly to select “ALL CH SEARCH” or
“CAT SEARCH”.
2
Press the numeric buttons (
B
) to enter the
desired three-digit channel number.
For example, to enter the number 123, press the
numeric buttons (
B
) as shown below.
y
• To display the XM Radio ID number in the front panel display,
select channel “0”.
• To enter a one-digit or two-digit channel number, press the
numeric buttons (
B
) on the remote control and then press
N
ENT
to confirm the input number.
• Instead of pressing
N
ENT
to tune into the channel
immediately, you can wait a few seconds until this unit confirms
the entered channel number.
• Pressing a button other than the numeric buttons (
B
) or
N
ENT
cancels the Direct Number Access mode procedure.
You can use this feature to store up to 40 XM Satellite
Radio channels (A1 to E8: 8 preset channel numbers in
each of the 5 preset channel groups). You can then recall
any preset channel easily by selecting the preset channel
group and number as described in “Preset Search mode”
(page 63).
1
Search for a channel you want to set as a
preset channel by using one of the XM
Satellite Radio search modes.
For details, see “XM Satellite Radio operations”
(page 62).
2
Press
F
MEMORY
(or
0
MEMORY
).
The PRESET indicator lights up in the front panel
and this unit automatically selects an empty preset
number.
y
• To store the selected channel under an empty preset
number automatically, press and hold
F
MEMORY
(or
0
MEMORY
) for more than 2 seconds instead of step 2.
In this case, the following steps are unnecessary.
• To cancel the preset operation, press
F
MEMORY
(or
0
MEMORY
) again.
3
To select the preset channel group and
number (A1 to E8), press
E
PRESET/
TUNING/CH
l
/
h
(or
9
CAT./A-E
l
/
h
and
9
PRESET/CH
k
/
n
) repeatedly.
• To select a higher preset channel group and
number, press
E
h
(or
9
k
).
• To select a lower preset channel group and number,
press
E
l
(or
9
n
).
y
• You can also select a preset number (1 to 8) by pressing
the numeric buttons (
B
).
• If you select a preset number being used (“*” appears next
to the preset number), the current preset channel will be
overwritten.
Before performing the following operations, set the operation
mode selector on the remote control to
F
SOURCE
and then
press
3
XM
.
1
2
3
Setting the XM Satellite Radio
preset channels
0 4 3 X M U
Channel number
PRESET
M E M O R Y A 1
0 4 3 X M U
Lights up
