Yamaha RCX series, Руководство пользователя

Страница: 25 / 84

2-3
Chapter
2
CONNECTION
3. Setting the CC-Link compatible module
To connect the CC-Link system specification controller to the CC-Link system, the
station No. and communication speed must be set with the rotary switch on the CC-Link
compatible module. Confirm the current station No. and communication speed with the
procedures given in section 1.
3.1 Setting the station No.
Using the rotary switches MSB and LSB in front of the CC-Link compatible module, set the
station No. of the robot controller in the CC-Link system.
n
NOTE
Up to 64 stations can be set in the CC-Link system, but the CC-Link system itself
occupies 4 stations (specifi ed No. +3), so set the station No. between 1 and 61.
1
2 3
4
5
6
7
8
9
1
2
3
4
5
6
7 8
9
1
2 3
4
5
6
7
8
9
MSB
LSB
Front of the unit
w
WARNING
WHEN SETTING THE STATION NO., COMPLETELY SHUT OFF THE POWER SUPPLIED TO
THE ROBOT CONTROLLER.
[Procedures]
1. Check the station No. of the robot controller in the CC-Link system.
The station No. must be set between 1 and 61.
2. Using a flat-blade precision screwdriver, set the 10th digit on rotary switch MSB.
3. In the same manner, set the 1st digit on rotary switch LSB.
3. Setting the CC-Link compatible module