Yamaha PortaTone PSR-6000, Руководство пользователя

Страница: 95 / 144

92
File names can be up to 8 characters long. Use
the
< >
LCD dial buttons to move the name cursor
to the various character positions, then use the
A~Z
or
0~9
.. LCD dial to select the required character
for each position. The
A~Z
LCD dial selects capital
letters and the
0~9
.. LCD dial selects numbers and
special characters.
When the file and, if necessary, the file name has
been specified, press the
EXECUTE
LCD button to
actually begin the save operation — the “
Are you
sure?
” confirmation display will appear.
If you want to execute the save operation press
the
YES
LCD button (or press
NO
LCD button to
cancel the operation). “
Do not remove disk!
”
will appear while the data is being saved, and the
progress of the save operation will be indicated by
a bar graph at the bottom of the display. You can go
back to the file list by pressing the
LIST
LCD
button.
The data saved to disk is as follows:
• Instrument setup (condition) data (including DOC/
GM Chain list data).
• Disk style data.
• Custom voice data.
• Custom style data.
• Panel registration data.
• One touch setting data.
• Pad assignment data (Multi, Tempo, and Percussion
assignments).
• Sequencer song data.
If you insert a disk that has not been formatted
into the drive, the display shown to the right will
appear when the [TO DISK] button is pressed:
Press the
YES
LCD button to format the disk (see
“FORMAT DISK” on page 98).
NOTES
• If you press the LIST LCD button to switch displays
after entering a file name and pressing the EXECUTE
LCD button, but before actually saving the name, the
new file name will be canceled.
• See page 111 for a list of error messages that may
appear during disk save.
• The PSR-6000 identifies and handles disk files by
number rather than the file name. If you save to a file
number that already contains data, the original data
will be erased and replaced by the new data.
F6: Disk