manualshive.com logo in svg

Yamaha PortaTone PSR-6000, Руководство пользователя

Поделиться
Скачать
Yamaha PortaTone PSR-6000 Скачать руководство пользователя страница 49

46

■

Muting Specific Parts

By turning off (muting) the left- or right-hand

melody part, or both, you can practice playing those
parts on the PSR-6000 keyboard. The PSR-6000
also makes it possible to mute the rhythm, bass, and
accompaniment parts. Sheet music is provided with
the Disk Orchestra Collection disks.

Press the 

MUTE

 LCD button (from the 

VOL-

UME

 display) and use the 

RHY

, 

BASS

, 

ACC.

,

LEFT

, and/or 

RIGHT

 LCD dials to set the corre-

sponding part to 

PLAY

, 

MUTE

, or 

SOLO

.

PLAY

The corresponding part plays normally.

MUTE

The corresponding part is muted and will
not play.

SOLO

Only the corresponding part will play — all
others are muted.

Press the 

VOLUME

 LCD button when you want to go

back to the volume-control display.

NOTES

• The left and right-hand parts cannot be played separately on

some songs.

• The appropriate voice for the part you are going to play is

automatically selected when you select a song (When “ALL”

             buttons function in exactly the same way as in the normal play mode (page 17, 18).

■

Other Controls That Function In
the DOC Mode

• Keyboard.

• Voice select buttons (the DOC voice list is different

from the normal play mode voice list — the voice
group [12] button does not function).

• START and STOP buttons (ABC does not function).

• REVERB and EFFECT buttons (REVERB is auto-

matically turned ON when the DOC mode is en-
gaged).

• TEMPO buttons (the recommended tempo can be

selected by pressing both the [+] and [-] buttons
simultaneously).

• SUSTAIN button and pedal (Affects notes played on

the keyboard. Sustain Part Select fixed at Orchestra
1).

• PITCH BEND wheel (affects notes played on the key-

board. Pitch Bend Select fixed at Orchestra 1. Range fixed
at 

±

300 cents).

• MODULATION/EFFECT wheel (modulation applies to

Orchestra 1).

• PAD (fixed at PERCUSSION. Voices fixed as per normal

play mode, and cannot be changed in the DOC mode).

• FOOT SWITCH (applies to notes played on the keyboard.

Footswitch Select fixed at GLIDE).

• FOOT CONTROLLER (Applies to notes played on the

keyboard. Foot Controller Select fixed at Orc1Vol).

• FUNCTION buttons (F2 and F8 only — pages 84 and

102).

• LIST HOLD button.

• HELP button.

• MIDI transmission/reception.

NOTES

• Since octave offset is applied to some voices played via the

keyboard in the DOC mode, the pitch of notes played via the
keyboard may not match that of those played via MIDI note
numbers.

is selected, the voice for the first song is automatically selected).

■

Octave, Transpose,  and Tune

The 

OCTAVE

 and 

TRANSPOSE/TUNE

 LCD

Playing DOC (Disk Orchestra Collection) & General MIDI Music Software Disks

Содержание PortaTone PSR-6000

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды