Yamaha PortaTone PSR-6000, Руководство пользователя

Страница: 89 / 144

86
F3: Controller
The [F3] function group includes four functions that affect how the
PSR-6000 responds to control via the keyboard, a foot controller
plugged into the rear-panel FOOT CONTROLLER jack, the MODULA-
TION/EFFECT wheel, the [SUSTAIN] button and SUSTAIN footswitch,
the PITCH BEND wheel, and a footswitch plugged into the rear-panel
FOOT SWITCH jack.
■
MODULATION/EFFECT WHEEL
...................................................................................................................................
Determines whether the MODULATION/EF-
FECT wheel will control modulation or the selected
effect (page 32), and whether it will affect the
orchestra 1 voice, the orchestra 2 voice, or both
orchestra voices.
Use the
TYPE
LCD dials to select either
MODU-
LATION
or
EFFECT
operation. If
MODULATION
is selected the
ORC2
and
ORC1
assignment param-
eters will appear: use the corresponding LCD dials
to turn modulation wheel operation
ON
or
OFF
for
the
ORC2
and
ORC1
parts, as required.
■
FOOT CONTROLLER
...............................................................................................................................................................
Determines whether a foot controller plugged
into the rear-panel
FOOT CONTROLLER
jack will
control master volume, the volume of an individual
orchestra part (rhythm, ABC, etc.), or the depth of
the selected effect.
Use the
TYPE
LCD dials to select
MASTER
VOLUME
for master volume control,
INDIVIDUAL
VOLUME
for individual part volume control, or
EFFECT
for effect depth control.
Individual part assignment parameters for the
RHY
,
ABC
,
ORC2
and
ORC1
parts will appear
when the
INDIVIDUAL
type is selected. Use the
corresponding LCD dials to turn volume control for
the corresponding parts
ON
or
OFF
as required.
NOTES
• Normally you’ll want to be able to apply expression
control to the orchestra voices without affecting the
accompaniment and rhythm sound, so the INDIVIDUAL
type should be selected and the ORC1 and/or ORC2
part turned on while the remaining parts are turned off.
• The EFFECT setting only applies when the panel
[EFFECT] button is turned ON.