manualshive.com logo in svg

Yamaha PortaTone PSR-6000, Руководство пользователя

Поделиться
Скачать
Yamaha PortaTone PSR-6000 Скачать руководство пользователя страница 36

33

Using the Pads

The PSR-6000 features 8 “PADs” above the keyboard that can be used in a vari-

ety of ways:

● 

 MULTI:

When the MULTI mode is selected, the 4 pads marked “PHRASE” and the 4 pads
marked “CHORD” can be used to record and play back short sequences of notes and
chords, respectively.

●

  PERC:

In the PERC mode the pads can be used to play 8 different drum and percussion
instruments selected from the PSR-6000’s drum voices — DRUM KIT and POP
DRUM KIT.

●  

 TEMPO:

In the TEMPO mode the pads are used to vary tempo in a number of ways, giving the
PSR-6000 unprecedented capability for creative tempo variations while playing.

NOTES

• Pad data can be saved to floppy disk. See page 95 for details.

The MULTI Mode

The PHRASE Pads (pads 1 … 4)

Each PHRASE pad can record up to approximately 160 notes played using the ORCH. 1 voice

(only the ORCH. 1 voice is recorded even if the  ORCH. 2+1 orchestration mode is selected).
The recorded phrases can then be played back at any time — even while playing on the keyboard,
with or without accompaniment. The PHRASE pads record the following data:

• Voice (Orch.1)
• Note On/Off (Orch.1)
• Modulation (when Modulation is On for Orchestra 1: see page 32)
• Orchestra 1 Volume
• Sustain On/Off (when Sustain is On for Orchestra 1: see page 31)
• Pitch Bend (when Pitch Bend is On for Orchestra 1: see page 32)
• Glide On/Off (when Glide is On for Orchestra 1: see page 88)
• Octave Change (Orch. 1)

NOTES

• The data listed above is also recorded if it is received via the PSR-6000 MIDI interface (page 102).

To engage the MULTI mode, press the [MODE SELECT]

button a few times until the MULTI indicator lights.

NOTES

• Preset data is initially recorded in pads 1 through 8.

MODE

SELECT

MULTI     REPEAT

PERC.      BREAK

TEMPO    SYNCHRO

MODE

SELECT

MULTI     REPEAT

PERC.      BREAK

TEMPO    SYNCHRO

PAD

MULTI PLAYING

REC /

STOP

PHRASE

CHORD

Tempo l

Tap Start

Tempo Change

a tempo

faster

accel.

slower

rit.

8

7

6

5

4

3

2

1

Содержание PortaTone PSR-6000

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды