manualshive.com logo in svg

Yamaha PortaTone PSR-6000, Руководство пользователя

Поделиться
Скачать
Yamaha PortaTone PSR-6000 Скачать руководство пользователя страница 82

79

F1: Custom Voice Edit

NOTES

• When Pan is set to the center position, the preset pan

setting of the selected voice is used, creating a stereo
effect with some voices.

●

MODULATION

The two parameters provided in this screen are

used to adjust the depth and speed of modulation
produced by the PSR-6000 MODULATION/EF-
FECT wheel.

3 DEPTH
Decreases (-) or increases (+) the depth of modu-
lation produced by the PSR-6000 MODULA-
TION/EFFECT wheel relative to the original
modulation depth of the selected voice. Use the

3

 LCD dial to set as required.

4 SPEED
Decreases (-) or increases (+) the speed of modu-
lation produced by the MODULATION/EF-
FECT wheel relative to the original modulation
speed of the selected voice. Use the 

4

 LCD dial

to set as required.

NOTES

• The maximum range of the depth and speed is from -

7 through 0 to +7, although this range is more limited
with some voices. An exclamation mark (!) will appear
next to the parameter when the maximum or minimum
allowable setting for the selected voice has been
reached.

• The default modulation depth and speed values for the

selected voice are produced by settings of “0”. Minus
settings produce gentler or slower modulation, while

plus settings produce deeper or faster modulation,
respectively.

• Modulation is applied automatically to some voices, and in

some cases operating the wheel causes modulation to be
applied automatically.

●

TONE

The 

BRILLIANCE

 and 

RESONANCE

 parameters

provided here make it possible to vary the tone of the
voice over a wide range.

5 BRILLIANCE
This parameter alters the cutoff frequency of the filter
applied to the voice, thereby making the sound more
or less brilliant. Minus settings reduce brilliance for a
rounder, more mellow tone, while plus setting in-
crease brilliance for a sharper tone. Use the 

5

 LCD

dial to set as required.

6 RESONANCE
Plus settings increase the height of a resonant peak at
the filter cutoff frequency, giving the voice greater
presence and sometimes a more “nasal” tone. Minus
settings reduce resonance for a “flatter” sound. Use
the 

6

 LCD dial to set as required.

NOTES

• The maximum range of both parameters is from -50 through

0 to +50, although this range is more limited with some

Содержание PortaTone PSR-6000

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды