manualshive.com logo in svg

Yamaha PortaTone PSR-6000, Руководство пользователя

Поделиться
Скачать
Yamaha PortaTone PSR-6000 Скачать руководство пользователя страница 115

112

Error Messages

Not enough memory to load the specified sequencer file from disk.

You have attempted to perform a save, rename, delete, format, or disk
free area operation while a pre-programmed (non-user) disk is in the
drive.

The disk in the drive has not been formatted or the disk is the wrong
type or has the wrong format. The current disk is write protected so no
format option is provided with this error message (see below).

The disk in the drive has not been formatted or the disk is the wrong
type or has the wrong format. In this case the current disk can be written
to, so a format option is provided with the error message.

The disk write protect tab is in the write disable position, so the
specified operation cannot be performed.

No disk in drive. Insert an appropriate disk and try again.

The disk does not contain any files saved by the user.

Not enough memory.

Not a user disk!
Cannot continue.

Wrong disk type/format!
Cannot continue.

Wrong disk type/format!
Format disk? (All data will
be erased!)

Disk write protected!
Cannot continue.

Disk not found.
Please insert disk.

File not found!

■

MIDI Errors

..........................................................................................................................................................................................

An error has been encountered while receiving MIDI system exclusive
data — e.g. during a MIDI bulk dump operation.

The MIDI receive buffer cannot handle the amount of data being
received. Reduce the complexity of the data being received and try
again.

System exclusive error.

MIDI receive buffer over-
flow.

■

DOC/GM Mode Errors

.............................................................................................................................................................

The loaded disk does not contain DOC or GM song files recognizable
by the PSR-6000.

The specified song file cannot be found on the currently loaded disk.

An error was encountered while loading data from the disk.

Wrong disk type!
(Operation cancelled.)

File not found!
(Operation cancelled.)

Disk load error!
Operation cancelled.

■

Other Messages

............................................................................................................................................................................

The PSR-6000 retains all data in memory for up to approximately one
week if the power is not turned on during this time. This message will
appear if a longer period of time has elapsed since the last time the
power was turned on. In this case all data will be initialized to the
factory-preset values. This message will also appear when all internal
data is initialized by turning on the power while holding the [EXIT] and
[DEMO] buttons.

Back up time limit exceeded!
All data was initialized.

Содержание PortaTone PSR-6000

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды