PM5D / PM5D-RH Quick Start Guide Part 3
23
PM5D data loading from PCMCIA card.
(Basic Load All
Data);
Access the LOAD screen from DISPLAY ACCESS>UTILITY>>LOAD.
Before loading data into a PM5D be sure that the data within the console is backed up or no longer required.
WARNING!!
LOADING DATA IN THIS WAY OVERWRITES ALL EXISTING CONSOLE DATA.
*
The load page will show a list populated with all the things saved to the memory card, even non-PM5D related things.
Scroll until you fi nd your .PM5 fi le click on [LOAD] and any confi rm dialogue boxes. Your data will be loaded into the
console and any data within the console is lost.
*
(Output data can be retained if Output Isolation feature is used).
In addition to the LOAD;
The console will be setup just as you dictated in Studio
Manager. Only the rotary pots of the monitor section, the
HA section on a regular PM5D and THE +48V MASTER
SWITCH ON THE BACK OF PM5D-RH are not
necessarily the same.
You might want to add some labeling tape to the User
Defi ned Key area and to the mix masters at this stage.
Now you can do your fi rst soundcheck and show. Store scenes as you go along. If you are unsure about when to store,
just do it often; you can always delete scenes later.
Part 2 of the guide gives further information on saving and loading with PCMCIA cards and also how to edit scenes and
manage recall options.
