Yamaha PM1D Manager V2 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 56

background image

Surround panning

45

Cautions regarding surround pan

Cautions and limitations regarding the use of surround pan are explained below.

■

Scene recall operations

•

The surround mode setting is saved in the scene.

•

If you recall a scene that has a differing surround
mode, the screen and panel display will change
accordingly. In this case, the surround mode, the
settings of MIX channels 17–24, and the surround-
related parameters of all input channels will all be
recalled, regardless of the Selective Recall or Recall
Safe settings.

•

If when one channel is excluded from recall, you
recall a scene whose PATTERN LINK button is
turned on, the PATTERN LINK button will remain
on, and only the other channel will be recalled.
Subsequent operation will function according to
the LINK setting.

■

Channel library recall operations

•

Input libraries contain all of the surround-related
parameters except for the surround mode.

•

PATTERN LINK settings will be recalled from an
input channel library only if the recall-destination
channels are paired.

•

If PATTERN LINK is on, and you recall a monau-
ral (non-paired) input channel library, the PAT-
TERN LINK button setting will remain on, and
only the other channel will be recalled. Subsequent
operation will function according to the LINK set-
ting.

■

Channel copy

•

When you perform panel operations to copy an
input channel, surround-related parameters will
also be copied.

•

However, PATTERN LINK settings will be copied
only if the copy-source channel is paired and set to
ALL.

•

In order to copy surround-related parameters in
the IN CH VIEW function CH COPY screen, you
must turn on the PARAMETER SELECT area’s
ALL button, or the SEND button and MIX 17–24
buttons. (When surround mode is active, the
PARAMETER SELECT area MIX 17–24 buttons
are always linked.)

■

Global paste

•

When using the Global Paste function while sur-
round mode is active, the MIX SEND 17–24 but-
tons in the GLOBAL PASTE screen PARAMETER
SELECT area are always linked.

•

In order to paste surround-related parameters, you
must turn on the PARAMETER SELECT area’s
LEVEL button, or the SEND button and MIX
SEND 17–24 buttons. If two adjacent channels are
selected in the SOURCE CH SELECT area, PAT-
TERN LINK settings will also be pasted.

•

If different surround modes are selected for the
paste-source and paste-destination, MIX buses 17–
24 will be excluded from the operation.

«
...
43
44
45
46
47
...
»

Содержание PM1D Manager V2

























































Отзывы:

Нет отзывов

Похожие инструкции для PM1D Manager V2

Бренд: Yamaha Страницы: 52

Бренд: Yamaha Страницы: 80

Бренд: sescom Страницы: 5

Бренд: Fender Страницы: 90

Бренд: Rowlett Страницы: 12

DIGITAL iPAD/TABLET MIXER iX16

Бренд: Behringer Страницы: 4

Kitchen machine with attachments

Бренд: Morphy Richards Страницы: 9

Бренд: Sanyo Страницы: 8

Бренд: Sanyo Страницы: 32

Бренд: Fristam Pumpen Страницы: 40

CertiSafe 2400C61

Бренд: Kasco Страницы: 14

Бренд: Cornell Страницы: 4

Бренд: Cornell Страницы: 6

Бренд: Telex Страницы: 6

Бренд: Rane Страницы: 6

Бренд: AUSTRALIAN MONITOR Страницы: 2

Бренд: AUSTRALIAN MONITOR Страницы: 2

Бренд: AUSTRALIAN MONITOR Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды