Selective Recall
19
Hint
Each time you switch between the RECALL PARAM-
ETER button and the SAFE PARAMETER button,
the settings in the screen will be initialized as follows.
•
When you switch to the RECALL PARAMETER
button, all channels will be set to RECALL ON/
OFF button = On and RECALL PARAMETER
SELECT = ALL.
•
When you switch to the SAFE PARAMETER but-
ton, all channels will be set to SAFE ON/OFF but-
ton = Off and SAFE PARAMETER SELECT = ALL.
2
ENABLE/DISABLE button
This button enables (button indicates ENABLE) or
disables (button indicates DISABLE) the Selective
Recall function individually for each scene.
3
RECALL ON/OFF button
SAFE ON/OFF button
This button selects the channel that will be affected.
The function of this button will change depending
on the mode you select in the SELECTION MODE
area (
1
).
•
If RECALL PARAMETER is on
This button will function as the SAFE ON/OFF but-
ton to specify channels that will be affected by recall
operations.
•
If SAFE PARAMETER is on
This button will function as the SAFE ON/OFF but-
ton to specify channels that will be excluded from
recall operations.
The input channels/output channels for which this
function can be set are the same as in the SCENE
function RECALL SAFE screen.
4
RECALL PARAMETER SELECT button
SAFE PARAMETER SELECT button
This button selects the parameter that will be
affected. The function of this button will change
depending on the button you select in the SELEC-
TION MODE area (
1
).
•
If RECALL PARAMETER is on
This button will function as the RECALL PARAME-
TER SELECT button to specify parameters that will
be affected by recall operations.
•
If SAFE PARAMETER is on
This button will function as the SAFE ON/OFF but-
ton to specify parameters that will be excluded from
recall operations.
The types of parameters for which this function can
be set are the same as in the SCENE function
RECALL SAFE screen, with the exception that you
cannot specify UNIT (a unit patched to an input
channel) as an input channel.
5
SET ALL
If you click this button, all corresponding parameter
buttons will be turned on.
6
CLEAR ALL
If you click this button, all corresponding parameter
buttons will be turned off.
7
OTHERS
Use these buttons to select parameters other than the
above. The function of these buttons will change
depending on the button that is selected in the
SELECTION MODE area (
1
).
•
If RECALL PARAMETER is on
These buttons select the parameters that will be
affected by recall operations.
2
3
4
5
6
7
