manualshive.com logo in svg

Yamaha MU100R, Руководство пользователя

Yamaha MU100R - инновационный синтезатор, который обеспечивает высочайшее качество звука и беспрецедентную гибкость в настройках. Для получения подробной информации о возможностях этого устройства, загрузите бесплатный Owner'S Manual с официального сайта manualshive.com. Наслаждайтесь музыкальным творчеством без ограничений!

Поделиться
Скачать
background image

PRECAUTIONS

ix

• Do not operate the instrument for a long period of time at a high or

uncomfortable volume level, since this can cause permanent hearing
loss. If you experience any hearing loss or ringing in the ears, consult a
physician.

■

REPLACING THE BACKUP BATTERY

• This instrument contains a non rechargeable internal backup battery

which permits internal data to remain stored even when the power is off.
When the backup battery needs replacing, the message “Battery Low!”
will display in the display. When this happens, immediately back up
your data (using an external device such as the floppy disk-based
Yamaha MIDI Data Filer MDF2), then have qualified Yamaha service
personnel replace the backup battery.

• Do not attempt to replace the backup battery yourself, in order to prevent

the possible serious hazards. Always have qualified Yamaha service
personnel replace the backup battery.

• Never place the backup battery in a location that a child can reach, since

a child might accidentally swallow the battery. If this should happen,
consult a physician immediately.

■

SAVING USER DATA

• Save all data to an external device such as the Yamaha MIDI Data Filer

MDF2, in order to help prevent the loss of important data due to a
malfunction or user operating error.

Yamaha cannot be held responsible for damage caused by improper
use or modifications to the instrument, or data that is lost or destroyed.

Always turn the power off when the instrument is not in use.

PRECAUTIONS

 PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep these precautions in a safe place for future reference.

 

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not open the instrument or attempt to disassemble the internal parts

or modify them in any way. The instrument contains no user-serviceable
parts. If it should appear to be malfunctioning, discontinue use
immediately and have it inspected by qualified Yamaha service
personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, or place containers on it containing liquids which might
spill into any openings.

• If the AC adaptor cord or plug becomes frayed or damaged, or if there is

a sudden loss of sound during use of the instrument, or if any unusual

smells or smoke should appear to be caused by it,  immediately turn off
the power switch, disconnect the adaptor plug from the outlet, and have
the instrument inspected by qualified Yamaha service personnel.

• Use the specified adaptor (PA-5B or an equivalent recommended by

Yamaha) only. Using the wrong adaptor can result in damage to the
instrument or overheating.

• Before cleaning the instrument, always remove the electric plug from

the outlet. Never insert or remove an electric plug with wet hands.

• Check the electric plug periodically and remove any dirt or dust which

may have accumulated on it.

 

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not place the AC adaptor cord near heat sources such as heaters or

radiators, and do not excessively bend or otherwise damage the cord,
place heavy objects on it, or place it in a position where anyone could
walk on, trip over, or roll anything over it.

• When removing the electric plug from the instrument or an outlet, always

hold the plug itself and not the cord.

• Do not connect the instrument to an electrical outlet using a multiple-

connector. Doing so can result in lower sound quality, or possibly cause
overheating in the outlet.

• Unplug the AC power adaptor when not using the instrument, or during

electrical storms.

• Before connecting the instrument to other electronic components, turn

off the power for all components. Before turning the power on or off for
all components, set all volume levels to minimum.

• Do not expose the instrument to excessive dust or vibrations, or extreme

cold or heat (such as in direct sunlight, near a heater, or in a car during
the day) to prevent the possibility of panel disfiguration or damage to
the internal components.

• Do not use the instrument near other electrical products such as

televisions, radios, or speakers, since this might cause interference which
can affect proper operation of the other products.

• Do not place the instrument in an unstable position where it might

accidentally fall over.

• Before moving the instrument, remove all connected adaptor and other

cables.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint

thinners, solvents, cleaning fluids, or chemical-impregnated wiping
cloths. Also, do not place vinyl or plastic objects on the instrument,
since this might discolor the panel or keyboard.

• Do not rest your weight on, or place heavy objects on the instrument,

and do not use excessive force on the buttons, switches or connectors.

Содержание MU100R









































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MU100R

Raith 150 System Operation Manual preview
150
Бренд: Raith Страницы: 26
Kane 501C Manual preview
501C
Бренд: Kane Страницы: 16
NEC NEAX 2000 IVS System Manual preview
NEAX 2000 IVS
Бренд: NEC Страницы: 54
7th Sense medialon Showmaster Go User'S Reference Manual preview
medialon Showmaster Go
Бренд: 7th Sense Страницы: 9
AcceleDent aura Frequently Asked Questions preview
aura
Бренд: AcceleDent Страницы: 3
Zero 88 Solution Quick Start Manual preview
Solution
Бренд: Zero 88 Страницы: 32
Federal Signal Corporation VECTOR Installation And Maintenance Instructions preview
VECTOR
Бренд: Federal Signal Corporation Страницы: 2
Harman Kardon EQ8 Owner'S Manual preview
EQ8
Бренд: Harman Kardon Страницы: 7
Quincy QR-25 Series Manual preview
QR-25 Series
Бренд: Quincy Страницы: 31
Quidel Lyme FIA Sofia 2 User Manual preview
Lyme FIA Sofia 2
Бренд: Quidel Страницы: 49
Quest Leisure Products Versailles Instructions Manual preview
Versailles
Бренд: Quest Leisure Products Страницы: 12
Raymarine ST60+ SPEED INSTRUMENT Owner'S Handbook Manual preview
ST60+ SPEED INSTRUMENT
Бренд: Raymarine Страницы: 60
Raymarine Maxiview ST80 Operation Manual preview
Maxiview ST80
Бренд: Raymarine Страницы: 15
RaycoWylie i3500 Quick Start Manual preview
i3500
Бренд: RaycoWylie Страницы: 9
Raven SmarTrax Calibration & Operation Manual preview
SmarTrax
Бренд: Raven Страницы: 58
Raven Sidekick Pro Quick Installation Reference preview
Sidekick Pro
Бренд: Raven Страницы: 26
Ravo MP-10 Owner'S Manual preview
MP-10
Бренд: Ravo Страницы: 114
Alcoscan AL4000 User Manual preview
AL4000
Бренд: Alcoscan Страницы: 6

Бренды по названию

Популярные бренды

Загрузить еще бренды