Yamaha MU100R Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 200

Yamaha MU100R Скачать руководство пользователя страница 41

• Notice that as you increase the bank number, at some point beyond the XG

Voice banks (above bank 127) the bank number returns to “000” and the fol-
lowing icon appears in the display:

Banks showing this icon are MU100 Exclusive Voice banks, and are different
than the same numbered XG Voice banks. (See the “Sound List & MIDI Data”
booklet.)

• VL Voice banks may also be selected if VL Voice selection for the Part has been

enabled. (See page 69.)

• Though the MU100R skips over bank numbers with identical Voices (see step

#3 above), it can be set to not skip bank numbers, if desired. (See page 160:
Utility mode/System/Display Bank Select.)

Changing the Play Mode Display

The MU100R lets you view the Parts in three ways, depending on your prefer-
ence.

Press the [PLAY] button repeatedly.
Each press of the [PLAY] button switches among the three displays below.

1) Full level meters

2) All Parts, with half level meters

3) All Parts, with full level meters

This shows the level meters at their maximum height,
but only displays half of the Parts.

This displays all Parts, but the level meters are at half the height.

This displays all Parts with the level meters at maximum height.
However, the Voice name and number are not displayed.

Selecting and Playing Individual Voices

«
...
39
40
41
42
43
...
»

Содержание MU100R









































































































































































































Отзывы:

Нет отзывов