manualshive.com logo in svg

Yamaha MU100R, Руководство пользователя

Yamaha MU100R - инновационный синтезатор, который обеспечивает высочайшее качество звука и беспрецедентную гибкость в настройках. Для получения подробной информации о возможностях этого устройства, загрузите бесплатный Owner'S Manual с официального сайта manualshive.com. Наслаждайтесь музыкальным творчеством без ограничений!

Поделиться
Скачать
background image

178

Appendix

Troubleshooting

Troubleshooting

Even though the MU100R is exceptionally easy to use, it may occasionally
not function as you expect it to. If that happens, check the possible problems
and solutions below before assuming that the instrument is faulty.

Problem

No power.

No sound.

No sound when playing the
MU100R from a computer,
sequencer or external keyboard.

Notes are cut off or omitted.

Reverb, Chorus and/or Variation
effects cannot be heard.

The A/D input sound (mic, guitar,
etc.) cannot be heard.

VL Voice Section/

The VL Voices and/

Harmony Effect

or Harmony effect
cannot be used.

Other notes on VL
Voices and
Harmony effect:

Possible Cause and Solution

If you are using an AC adaptor, check that the adaptor is properly plugged into both the
AC outlet and the MU100R (See page 3.)

Check that:

●

The panel volume control is set to an appropriate level.

●

Other volume-related parameters are set to appropriate levels. (See Volume and Ex-
pression in the Single Part controls, page 96, and Master Volume and Master Attenua-
tor in the All Part controls, page 98.)

●

Mute or Solo are not active. (See page 85.) If a Part is being muted, or an empty Part is
being soloed, you may not get any sound.

●

The Variation effect settings are appropriate. No sound will be output at all if Variation
Connection is set to INS (page 145), Variation Send is turned on for the Part (page 97),
and NO EFFECT is selected for the Variation Type (page 144). The easiest solution in
such a case is to turn off Variation Send for the Part.

●

The EG Attack Time (page 103) is appropriately short, for short percussive sounds.

●

The Velocity Sensitivity Offset (page 111) is appropriate.

●

The Note Limit Low and Note Limit High (pages 110, 136) settings are appropriate. If
the former is set higher than the latter, no sound will be output.

●

The Velocity Limit Low and Velocity Limit High (pages 111, 136) settings are appro-
priate. If the former is set too high and the latter too low, no sound may be output.

Check all MIDI connections, making sure that the MIDI OUT of the external device is
connected to the MIDI IN of the MU100R, and that the MIDI IN of the external device is
connected to the MIDI OUT of the MU100R. (See pages 17 – 19.) Or, if you are using the
TO HOST terminal with a computer, make sure that the terminal is properly connected to
the computer and that the HOST SELECT switch is properly set for your particular com-
puter. (See pages 19 – 22.) Also, make sure that you have turned on the connected MIDI
instrument or computer before turning on the MU100R. If you haven’t, simply turning
the MU100R off and back on again may solve the problem.

The maximum polyphony of the MU100R may be exceeded. The MU100R can play no
more than 64 notes at once. (Though 64 notes may seem to be more than enough, you may
run short when playing a connected keyboard along with some densely arranged song data.)

Check all Reverb-, Chorus- and Variation-related controls: Reverb Send, Chorus Send
and Variation Send in Single Part controls (page 97); Reverb Return, Chorus Return and
Variation Return (when Variation Connection is set to SYS) in All Part controls (pages 98
— 99). Also check the individual effect settings; if no Type has been selected, or if the
parameter settings are too low, there may be no effect sound.

Make sure that the appropriate A/D Part (A1 or A2) has been turned on and that the A/D
INPUT control is set to an appropriate level. Also for best results, make sure that the A/D
input type (Mic, Guitar, Keyboard, Audio) is set to match the input you are using.

Check the following points:

●

The VL Voices and Harmony effect can only be used in the XG or Performance modes.

●

The VL Voice must be assigned to a Part in the Part Assign parameter (page 169), and
the Harmony effect must be assigned to a Part in the Insert Part parameter (page 151).

●

The VL Voices can only be used with Parts 1 – 16.

●

When using MIDI, the VL Voices and Harmony effect can only be controlled via the
MIDI-A terminal. When using TO HOST, they can only be controlled via MIDI port 1.

●

The VL Voices and Harmony effect can be used in the Performance mode; however,
the Store operation saves only edits made from the panel controls, and not any of the
“hidden” parameters accessible via MIDI.

●

When controlling certain VL Voice and Harmony effect parameters via MIDI, the value
or setting displayed in the LCD may not change, even though the actual value does.

●

Any edits made to the “hidden” VL Voices/Harmony effect parameters (accessible
only via MIDI) are not saved; turning off the power automatically cancels these set-
tings.

●

When backing up VL Voice and Harmony effect data via MIDI, the time it takes for the
data transfer may be quite long. Be careful not to turn off the power or disconnect the
AC adaptor until the operation is completed.

Содержание MU100R









































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MU100R

GE b30 User'S Reference Manual preview
b30
Бренд: GE Страницы: 242
GE ATS1290 Instruction Manual preview
ATS1290
Бренд: GE Страницы: 24
Balanced Body Allegro How To Assemble preview
Allegro
Бренд: Balanced Body Страницы: 3
Hanil J1250 User Manual preview
J1250
Бренд: Hanil Страницы: 60
Panasonic AJSPD850P - P2 DECK Operating Instructions Manual preview
AJSPD850P - P2 DECK
Бренд: Panasonic Страницы: 73
Panasonic LP-M Series Maintenance Manual preview
LP-M Series
Бренд: Panasonic Страницы: 174
Velocitek SC-1 Reference Manual preview
SC-1
Бренд: Velocitek Страницы: 81
ABS ABS-Lock X-Flat Instruction Manual preview
ABS-Lock X-Flat
Бренд: ABS Страницы: 8
ABS ABS-Lock X-DURCH Instruction Manual preview
ABS-Lock X-DURCH
Бренд: ABS Страницы: 8
ABS ABS-Lock DH05 Installation Manual preview
ABS-Lock DH05
Бренд: ABS Страницы: 8
Garmin PORTABLE ICE FISHING KIT Installation Instructions preview
PORTABLE ICE FISHING KIT
Бренд: Garmin Страницы: 5
M-Audio ProFire Lightbridge Quick Start Manual preview
ProFire Lightbridge
Бренд: M-Audio Страницы: 8
M-Audio REVOLUTION 5.1 User Manual preview
REVOLUTION 5.1
Бренд: M-Audio Страницы: 36
Vari Lite BeamLine VL800 User Manual preview
BeamLine VL800
Бренд: Vari Lite Страницы: 14
Vaniman VANGUARD 1X Quick Start Manual preview
VANGUARD 1X
Бренд: Vaniman Страницы: 3
ZacUrate 500E User Manual preview
500E
Бренд: ZacUrate Страницы: 2
ZacUrate 430P User Manual preview
430P
Бренд: ZacUrate Страницы: 2
Össur i-Digits Access Instructions For Use Manual preview
i-Digits Access
Бренд: Össur Страницы: 231

Бренды по названию

Популярные бренды

Загрузить еще бренды