Yamaha MU100R Скачать руководство пользователя страница 35

Страница: 35 / 200

Guided Tour

Press the [PLAY] button to go to the Performance Play mode.
You can press the [EXIT] button for this as well.

If the All Part display above (with the keyboard player icon) is not
shown, press both [PART

] buttons simultaneously.

Select the desired bank of Performances — Preset or Internal.
Use the [SELECT

] buttons to select the Bank parameter,

then use the [VALUE

] buttons to select the desired bank,

Preset (Pre) or Internal (Int).

• Preset bank

• Internal bank

“All” and keyboard player icon indicate All Part display
of Performance Play mode.

The upper body of the keyboard player icon is black,
indicating the Preset bank.

The upper body of the keyboard player icon is
white, indicating the Internal bank.

Selecting and Playing the Performances

Содержание MU100R









































































































































































































Результаты поиска

Содержание MU100R

Отзывы:

Yamaha MU100R, Руководство пользователя, Страница: 35 / 200

Результаты поиска

Содержание MU100R

Отзывы: