manualshive.com logo in svg

Yamaha MU100R, Руководство пользователя, Страница: 181 / 200

Поделиться
Скачать
Yamaha MU100R Скачать руководство пользователя страница 181

170

Utility Mode

Breath Control

Settings:

BC, Exp

This determines the MIDI control change
number to be used for breath control of
the VL Voice, when breath controller data
(number 02) is received via MIDI.  When
“BC” is selected, control number 02
(breath control) is used.  When “Exp” is
selected, control number 11 (expression)
is used.

Breath Curve

Range:

-16 — +16

Determines the relationship between
breath controller data (number 02) re-
ceived via MIDI, and the actual amount
of breath variation applied.  Negative set-
tings result in a large breath variation with
a relatively small amount of breath pres-
sure applied to the controller, while posi-
tive settings require a greater range of
input breath control values to produce the
same degree of breath variation.

Details
• This is also effective for breath controller

data transmitted from devices other than
those of the WX-series.

• The settings made here are effective only

when “BC/WX” is selected for the Breath
Mode.

VL Voices and Harmony System Parameters (PLUGIN)

Содержание MU100R









































































































































































































Отзывы:

Нет отзывов