manualshive.com logo in svg

Yamaha LS9 Editor, Руководство пользователя

Yamaha LS9 Editor - бесплатное дополнительное руководство для пользователей, которое можно загрузить с manualshive.com. Это важное руководство поможет вам освоить все функции данного продукта. Загрузите его сейчас и получите доступ к подробной информации о работе с редактором Yamaha LS9.

Поделиться
Скачать
background image

 

4

 

LS9-16/32  Owner’s Manual

 

PRECAUTIONS

 

PLEASE READ CAREFULLY BEFORE PROCEEDING 

 

* Please keep this manual in a safe place for future reference.

 

 WARNING

 

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from 
electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited 
to, the following:

 

• Only use the voltage specified as correct for the device. The required 

voltage is printed on the name plate of the device.

• Use only the included power cord. 

If you intend to use the device in an area other than in the one you 
purchased, the included power cord may not be compatible. Please check 
with your Yamaha dealer.

• Do not place the power cord near heat sources such as heaters or radiators, 

and do not excessively bend or otherwise damage the cord, place heavy 
objects on it, or place it in a position where anyone could walk on, trip over, 
or roll anything over it.

• Be sure to connect to an appropriate outlet with a protective grounding 

connection. Improper grounding can result in electrical shock.

• Do not open the device or attempt to disassemble the internal parts or 

modify them in any way. The device contains no user-serviceable parts. If it 
should appear to be malfunctioning, discontinue use immediately and have 
it inspected by qualified Yamaha service personnel.

• Do not expose the device to rain, use it near water or in damp or wet 

conditions, or place containers on it containing liquids which might spill 
into any openings.

• Never insert or remove an electric plug with wet hands.

• If the power cord or plug becomes frayed or damaged, or if there is a 

sudden loss of sound during use of the device, or if any unusual smells or 
smoke should appear to be caused by it, immediately turn off the power 
switch, disconnect the electric plug from the outlet, and have the device 
inspected by qualified Yamaha service personnel.

• If this device should be dropped or damaged, immediately turn off the 

power switch, disconnect the electric plug from the outlet, and have the 
device inspected by qualified Yamaha service personnel.

 

 CAUTION

 

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or 
damage to the device or other property. These precautions include, but are not limited to, the following:

 

• Remove the electric plug from the outlet when the device is not to be used 

for extended periods of time, or during electrical storms.

• When removing the electric plug from the device or an outlet, always hold 

the plug itself and not the cord. Pulling by the cord can damage it.

• When transporting or moving the device, do not hold the display. 

Improper transportation can result in injury or damage to the device itself.

• Before moving the device, remove all connected cables.
• When setting up the product, make sure that the AC outlet you are using is 

easily accessible. If some trouble or malfunction occurs, immediately turn 
off the power switch and disconnect the plug from the outlet. Even when the 
power switch is turned off, electricity is still flowing to the product at the 
minimum level. When you are not using the product for a long time, make 
sure to unplug the power cord from the wall AC outlet.

• Avoid setting all equalizer controls and faders to their maximum. 

Depending on the condition of the connected devices, doing so may cause 
feedback and may damage the speakers.

• Do not expose the device to excessive dust or vibrations, or extreme cold 

or heat (such as in direct sunlight, near a heater, or in a car during the day) 
to prevent the possibility of panel disfiguration or damage to the internal 
components.

• Do not place the device in an unstable position where it might accidentally 

fall over.

• Do not block the vents. This device has ventilation holes at the top and rear 

to prevent the internal temperature from becoming too high. In particular, 
do not place the device on its side or upside down. Inadequate ventilation 
can result in overheating, possibly causing damage to the device(s), or 
even fire.

• Do not use the device in the vicinity of a TV, radio, stereo equipment, 

mobile phone, or other electric devices. Doing so may result in noise, both 
in the device itself and in the TV or radio next to it.

Power supply/Power cord

Do not open

Water warning

If you notice any abnormality

Power supply/Power cord

Location

 

(5)-4

 

  1/2

Содержание LS9 Editor



































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для LS9 Editor

Waring WDM 360 Instructions Manual preview
WDM 360
Бренд: Waring Страницы: 20
TECHWOOD TMM-8001 Instruction Manual preview
TMM-8001
Бренд: TECHWOOD Страницы: 11
Jata hogar AC57 Instructions For Use Manual preview
AC57
Бренд: Jata hogar Страницы: 16
The box MEDIA ON The Box Owner'S Manual preview
MEDIA ON The Box
Бренд: The box Страницы: 16
Ozito Power X Change PXMMS-120 Instruction Manual preview
Power X Change PXMMS-120
Бренд: Ozito Страницы: 6
Ozito DMM-080 Instruction Manual preview
DMM-080
Бренд: Ozito Страницы: 14
Ozito CMX-080 Operation Manual preview
CMX-080
Бренд: Ozito Страницы: 17
Sapir SP-1110-GPN Instruction Manual preview
SP-1110-GPN
Бренд: Sapir Страницы: 28
Fracarro MX Series Operating Instructions preview
MX Series
Бренд: Fracarro Страницы: 4
CONTINENTAL EDISON CEBE200B Instruction Booklet preview
CEBE200B
Бренд: CONTINENTAL EDISON Страницы: 16
Sencor STM 3760WH Translation Of The Original Manual preview
STM 3760WH
Бренд: Sencor Страницы: 11
Jay-Lor 51000TM Owner'S Manual preview
51000TM
Бренд: Jay-Lor Страницы: 71
Rane MP 44 Operator'S Manual preview
MP 44
Бренд: Rane Страницы: 9
Kiwi KMX 3605 Instruction Manual preview
KMX 3605
Бренд: Kiwi Страницы: 16
Imetec B6602 Instructions For Use Manual preview
B6602
Бренд: Imetec Страницы: 42
Solid State Logic X-PANDA 82BXEM01A User Manual preview
X-PANDA 82BXEM01A
Бренд: Solid State Logic Страницы: 16
Nady Audio MPM 8175x Owner'S Manual preview
MPM 8175x
Бренд: Nady Audio Страницы: 12
Vivax SB-200WO User Manual preview
SB-200WO
Бренд: Vivax Страницы: 60

Бренды по названию

Популярные бренды

Загрузить еще бренды