manualshive.com logo in svg

Yamaha LS9 Editor, Руководство пользователя

Yamaha LS9 Editor - бесплатное дополнительное руководство для пользователей, которое можно загрузить с manualshive.com. Это важное руководство поможет вам освоить все функции данного продукта. Загрузите его сейчас и получите доступ к подробной информации о работе с редактором Yamaha LS9.

Поделиться
Скачать
background image

85

Operations in the SELECTED CHANNEL section

7

Oper

ations in the SELECTED CHANNEL section

LS9-16/32  Owner’s Manual

●

Adjusting the send level from the MIX 
channels to a specific MATRIX bus

To adjust the send level from the MIX channels to a spe-
cific MATRIX bus, access the send-destination MATRIX 
channel in the SELECTED CH VIEW screen.

1

SEND popup button

This button displays a popup window where you can make 
send level settings for eight channels at a time.

B

TO MATRIX LEVEL knobs

These adjust the send level of the signal sent from each 
MIX channel to the currently selected MATRIX bus.

To adjust the send level to a MATRIX bus, use the keys of 
the MIX/MATRIX SELECT section to select the MIX 
channel you want to operate, and then operate the 
SELECTED CHANNEL section [SELECTED SEND] 
encoder. (Alternatively, move the cursor to the TO 
MATRIX LEVEL knob in the screen, and operate the dial 
or the [DEC]/[INC] keys.)
At the left side of each of these knobs is shown the posi-
tion from which the signal is sent from the MIX channel. 
(For details on changing the send position 

→

 p. 213)

●

Making HA settings (input channels 
only)

To control the head amp (HA) assigned to an INPUT/ST 
IN channel, you will use the [HA GAIN] encoder of the 
SELECTED CHANNEL section and the HA field of the 
SELECTED CHANNEL VIEW screen. The HA field 
includes the following items.

1

HA popup button

This button displays the HA/PATCH popup window 
where you can make head amp settings for eight channels 
at a time (

→

 p. 57).

B

Input port select popup button

This accesses the PATCH/NAME popup window, where 
you can select the input port and specify the channel name 
and icon. The input port assigned to that channel is shown 
inside this button.

C

+48V button

This button switches the phantom power on/off for the 
head amp assigned to that channel.

D

ø

 (phase) button

This button switches the input assigned to that channel 
between normal phase and reverse phase. The phase is 
reversed when the button is on, and normal when the but-
ton is off.

E

OVER indicator

This will light when the input signal from the HA reaches 
the overload point.

F

GAIN knob

This indicates the amount of gain for the head amp 
assigned to that channel.

To adjust the gain value, use the SELECTED CHANNEL 
section [HA GAIN] encoder. (Alternatively, move the cur-
sor to the GAIN knob and operate the dial or the [DEC]/
[INC] keys.) The indicator above the GAIN knob in the 
screen shows whether the signal of the patched input port 
has overloaded.
When you move the cursor to the input port select popup 
button and press the [ENTER] key, the PATCH/NAME 
popup window will appear, allowing you to select the 
input port and specify the channel name and icon. (For 
details on the popup window 

→

 p. 55)

1

2

• If you want to make send level settings for eight channels at a 

time, use the SEND popup button in the screen to access the 
popup window (

→

 p. 77).

• If you’ve turned on POPUP APPEARS WHEN PRESSING 

KNOBS in the PREFERENCE popup window (

→

 p. 194), you can 

also access the above popup window by pressing the SELECTED 
CHANNEL section [SELECTED SEND] encoder.

• You can access the SEND popup window by moving the cursor to 

the To MATRIX SEND knob and pressing the [ENTER] key.

• For MATRIX buses that are set to STEREO, the left knob indicates 

the PAN of the MATRIX SEND, and the right knob indicates the 
SEND LEVEL.

HINT

2

1

6

3

5

4

• If you want to make head amp settings for eight channels at a 

time, use the HA popup button in the screen to access the HA/
PATCH popup window (

→

 p. 57).

• If you’ve turned on POPUP APPEARS WHEN PRESSING 

KNOBS in the PREFERENCE popup window (

→

 p. 194), you can 

also access the above popup window by pressing the SELECTED 
CHANNEL section [HA GAIN] encoder.

HINT

• The PAD will be internally switched on or off when the HA gain is 

adjusted between -14 dB and -13 dB. Keep in mind that noise may 
be generated if there is a difference between the Hot and Cold 
output impedance of the external device connected to the INPUT 
connector when using phantom power.

NOTE

Содержание LS9 Editor



































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для LS9 Editor

Phonic POWERPOD 410 User Manual preview
POWERPOD 410
Бренд: Phonic Страницы: 22
Omcan MX-CN-0060 Instruction Manual preview
MX-CN-0060
Бренд: Omcan Страницы: 12
Omcan SM-IT-0053-F Instruction Manual preview
SM-IT-0053-F
Бренд: Omcan Страницы: 28
LD LAX6 User Manual preview
LAX6
Бренд: LD Страницы: 110
VOX electronics 8606019600396 Operating Instructions Manual preview
8606019600396
Бренд: VOX electronics Страницы: 79
Oster 2502 Instructions Manual preview
2502
Бренд: Oster Страницы: 6
Hyundai HM 638 Instruction Manual preview
HM 638
Бренд: Hyundai Страницы: 32
Kenwood HM330 series Quick Manual preview
HM330 series
Бренд: Kenwood Страницы: 2
Kenwood HM52 Series Instructions Manual preview
HM52 Series
Бренд: Kenwood Страницы: 12
Kenwood HM520 series Instructions Manual preview
HM520 series
Бренд: Kenwood Страницы: 76
Kenwood HM790 series Instructions Manual preview
HM790 series
Бренд: Kenwood Страницы: 61
Kenwood HM 220 Instructions Manual preview
HM 220
Бренд: Kenwood Страницы: 41
Kenwood HMP10 Instructions Manual preview
HMP10
Бренд: Kenwood Страницы: 130
Kenwood HM-535 Instructions Manual preview
HM-535
Бренд: Kenwood Страницы: 98
Kenwood HM620 series Instructions Manual preview
HM620 series
Бренд: Kenwood Страницы: 101
Sony FXE-120 Specifications preview
FXE-120
Бренд: Sony Страницы: 8
Sony DMX-E3000 Brochure & Specs preview
DMX-E3000
Бренд: Sony Страницы: 8
Sony MX-P21 Operating Instructions Manual preview
MX-P21
Бренд: Sony Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды