INSP
ADJ
L-54
ENGINE OIL REPLACEMENT/
EXHAUST SYSTEM INSPECTION
4. Install :
• Drain plug ¿ with Washer
5. Fill :
• Oil in Crankcase
6. Check :
• Engine oil level
Refer to “ENGINE OIL LEVEL INSPECTION”
section Page no 3-14
7. Install
• Dip Stick (Oil Level Gauge)
EXHAUST SYSTEM INSPECTION
1. Inspect :
• Bolt ¿ (Exhaust Pipe)
Loose/ Damage Ÿ Tighten / replace.
• Gasket (Exhaust Pipe)
Exhaust gas leaks Ÿ Tighten /replace.
2. Inspect :
• Bolt À (Muffler)
Loose/Damage Ÿ Tighten /replace.
3. Inspect :
• Screw Á (Muffler Protector)
Loose/ damage Ÿ Tighten/replace
AIR FILTER CLEANING
NOTE
:
On the bottom of the Air Filter Case, there is a
Check Hose ¿. If dust and/or water collects in
this hose, clean the Air Filter Element and Air
Filter Case.
3-15
1
3
Drain plug :
20 Nm (2.0 m.Kg, 14.5 ft. lb)
Oil quantity :
1.0 L
Bolt :
10 Nm, 1.0 m.kg, 7.2 ft. lb.)
Bolt :
15 Nm (1.5 m.kg, 7.2 ft. lb)
