ENG
R-133
ENGINE ASSEMBLY AND ADJUSTMENTS
4-61
5. Install :
• Gasket
• Exhaust pipe ¿
• Bolts Exhaust Pipe À - 2 nos
• Bolt (Muffler) Á
6. Install :
• Shift Pedal ¿
7. Tighten :
• Bolt Shift Pedal À
8. Install :
• Stay Clutch Cable
9. Install
• Clutch cable
• Adjust Clutch Cable free play at Lever end
Refer “CLUTCH ADJUSTMENT” in Chapter 3,
Page no 3-17
10. Adjust
Drive Chain Slackness
Refer to “DRIVE CHAIN SLACK
ADJUSTMENT” section in Chapter 3, Page
no 3-20
Bolt (Engine Mount stay front lower)
38 Nm (3.8 m.kg., 27.5 ft.lb)
Engine Mount Bolt (Front lower)
38 Nm (3.8 m.kg., 27.5 ft.lb)
Engine Mount bolt (from upper))
38 Nm (3.8 m.kg., 27.5 ft.lb)
Engine Mount Bolt (Rear) :
38 Nm (3.8 m.Kg.27.5 ft. lb)
Bolt (Engine mount Stay) :
38 Nm (3.8 m..kg, 27. 5 ft.lt)
Engine mount bolt (upper)
38 Nm (3.8 m..kg, 27. 5 ft.lt)
Bolt (Engine Mount Stay front upper)
38 Nm (3.8 m.kg., 27.5 ft.lb)
Bolts (Exhaust Pipe) :
10 Nm (1.0m. kg, 7.2 ft. lb)
Bolt (Muffler) :
15 Nm (1.5 m.kg, 11 ft lb)
Bolt (Shift Pedal):
10 Nm (1.0m. kg, 7.2 ft. lb)
Bolt (cable stay) :
7 Nm (0.7 m.kg, 5.1 ft. lb)
