Trouble Recovery
95
TIP:
The buzzer sounds only when the control le-
ver is placed in neutral.
To check for water in separator
(1) Stop the engine.
(2) Remove the top cowling.
(3) Remove the fuel filter housing from its
holder.
(4) Remove the fuel filter cap, and then re-
move the fuel filter element and O-ring
from the filter cup.
(5) Drain the water in the filter cup by soak-
ing it up with a rag.
(6) Put the O-ring on the filter cup in its orig-
inal position, and then install the fuel filter
element and fuel filter cap.
(7) Install the fuel filter housing onto its hold-
er.
(8) Install the top cowling.
(9) Turn the main switch to the “
” (on) po-
sition and check that the water separa-
tor-alert indicator remains off and the
buzzer does not sound. If the water sep-
arator-alert indicator blinks or the buzzer
sounds, have your Yamaha dealer check
the outboard motor.
NOTICE:
Although
the buzzer will stop when the engine is
started and the remote control lever is
moved to the forward or reverse posi-
tion, do not use the outboard motor.
Otherwise, serious engine damage
could occur.
[ECM02391]
EMU33502
Treatment of submerged motor
If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immedi-
1. Fuel filter
1
1. Fuel filter cap
2. Filter element
3. O-ring
1
2
3
U6KNK0E0.book Page 95 Monday, November 7, 2022 10:23 AM
