manualshive.com logo in svg

Yamaha AW 16G, Руководство пользователя

Yamaha AW 16G - мощная цифровая звуковая рабочая станция с широкими возможностями записи и микширования. Владельцам этого устройства доступно бесплатное скачивание Руководства пользователя на manualshive.com. Полный и понятный мануал поможет освоить все функции AW 16G для создания высококачественной музыки.

Поделиться
Скачать
background image

 

3

 

WARNING

 

• Connect this unit’s power cord only to an AC outlet 

of the type stated in this Owner’s Manual or as 
marked on the unit. Failure to do so is a fire and elec-
trical shock hazard.

• Do not allow water to enter this unit or allow the 

unit to become wet. Fire or electrical shock may 
result.

• Do not place a container with liquid or small metal 

objects on top of this unit. Liquid or metal objects 
inside this unit are a fire and electrical shock hazard.

• Do not place heavy objects, including this unit, on 

top of the power cord. A damaged power cord is a 
fire and electrical shock hazard. In particular, be 
careful not to place heavy objects on a power cord 
covered by a carpet.

• Do not install a CD-RW drive into this device while 

the power cable is plugged into an AC outlet. Doing 
so is an electrical shock hazard.

• Use the ground connector on the rear panel to 

securely ground the device. If the device is not 
grounded, you may suffer a dangerous electrical 
shock.

• Do not scratch, bend, twist, pull, or heat the power 

cord. A damaged power cord is a fire and electrical 
shock hazard.

• Do not modify the unit. Doing so is a fire and electri-

cal shock hazard.

• If lightning begins to occur, turn off the power 

switch of the unit as soon as possible, and unplug the 
power cable plug from the electrical outlet.

• If there is a possibility of lightning, do not touch the 

power cable plug if it is still connected. Doing so may 
be an electrical shock hazard.

• Use only the included AC adaptor (PA-300) for this 

unit. Using other types may be a fire and electrical 
shock hazard.

• If the power cord is damaged (i.e., cut or a bare wire 

is exposed), ask your dealer for a replacement. Using 
the unit with a damaged power cord is a fire and elec-
trical shock hazard.

• Should this unit and AC adaptor be dropped or the 

cabinet be damaged, turn the power switch off, 
remove the power plug from the AC outlet, and con-
tact your dealer. If you continue using the unit with-
out heeding this instruction, fire or electrical shock 
may result.

• If you notice any abnormality, such as smoke, odor, 

or noise, or if a foreign object or liquid gets inside the 
unit, turn it off immediately. Remove the power cord 
from the AC outlet. Consult your dealer for repair. 
Using the unit in this condition is a fire and electrical 
shock hazard.

 

CAUTION

 

• Hold the power cord plug when disconnecting it 

from an AC outlet. Never pull the cord. A damaged 
power cord is a potential fire and electrical shock 
hazard. 

• Do not touch the power plug with wet hands. Doing 

so is a potential electrical shock hazard.

• This unit has ventilation holes at the bottom and rear 

to prevent the internal temperature rising too high. 
Do not block them. Blocked ventilation holes are a 
fire hazard. 
In particular, do not
- place the unit on its side or upside down,
- place the unit in any poorly-ventilated location 

such as a bookcase or closet.

- cover the unit with a table cloth or place it on a 

carpet or bed.

• Always touch a well-grounded metal surface or the 

like to fully discharge any static electric charge on 
your body and clothing before handling a CD-RW 
drive.
Neglecting this precaution can cause damage to the 
unit from static electricity.

• Be careful not to touch the leads (metal feet) on the 

rear side when handling a CD-RW drive. Touching 
the leads can cause contact defects.

• Do not cover or wrap the AC adaptor with a cloth or 

blanket. Heat may build up under the cloth or blan-
ket, melting the case, or causing fire. Use only in a 
well-ventilated environment.

 

PRECAUTIONS    – for safe operation –

 

Operation

Installation

 

In case an abnormality occurs during operation

Installation

 

Operation

Содержание AW 16G




























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для AW 16G

Callaway 200 S Manual preview
200 S
Бренд: Callaway Страницы: 11
Kawai EP3 Owner'S Manual preview
EP3
Бренд: Kawai Страницы: 66
VELOCICALC 9515 Operation And Service Manual preview
9515
Бренд: VELOCICALC Страницы: 6
Panametrics GF868 Service Manual preview
GF868
Бренд: Panametrics Страницы: 68
LATNEX RF Explorer User Manual preview
RF Explorer
Бренд: LATNEX Страницы: 55
Laser Technology TruPulse 200X Quick Reference Manual preview
TruPulse 200X
Бренд: Laser Technology Страницы: 11
Laser Technology TruPulse 200X User Manual preview
TruPulse 200X
Бренд: Laser Technology Страницы: 62
Navman A300 Sport.Tool Specification preview
A300 Sport.Tool
Бренд: Navman Страницы: 1
Lake Shore Cryotronics F71 User Manual preview
F71
Бренд: Lake Shore Cryotronics Страницы: 97
DAKOTA ULTRASONICS ZX-5 Instruction Manual preview
ZX-5
Бренд: DAKOTA ULTRASONICS Страницы: 50
Jamar Radar Recorder Quick Start Manual preview
Radar Recorder
Бренд: Jamar Страницы: 4
CA.MI T-PLUS User Manual preview
T-PLUS
Бренд: CA.MI Страницы: 68
Yamaha YX500R Owner'S Manual preview
YX500R
Бренд: Yamaha Страницы: 12
Cal Test Electronics CT3688A User Manual preview
CT3688A
Бренд: Cal Test Electronics Страницы: 12
Raytech TR-MARK III Instruction Manual preview
TR-MARK III
Бренд: Raytech Страницы: 7
Fora GTel Owner'S Manual preview
GTel
Бренд: Fora Страницы: 64
POSEIDON PVH2365 User Manual preview
PVH2365
Бренд: POSEIDON Страницы: 13
LaserLiner 082.214A Manual preview
082.214A
Бренд: LaserLiner Страницы: 64

Бренды по названию

Популярные бренды

Загрузить еще бренды