Yamaha A3000, Руководство по модернизации

Страница: 39 / 50

Changes in UTILITY MODE
39
Chapter 2
Chapter 2 Upgrade Reference
UTILITY - SYSTEM -
Audition
This is a new page. This page is located between the
Keys
and
Display
pages in the
UTILITY | SYSTEM function. You can jump to this page from almost location by press-
ing C AUDITION.
• Knob 2 (
Effect
) selects whether audition sound is passed through the program’s ef-
fects. Select
on
to pass the sound through the effects, or
off
to disconnect the effects.
Note that if you set the value to
on
and also set the
MainOut
parameter (EDIT | MAP/
OUT |
Output
page) to one of the effect blocks, you can use the audition feature to
hear how the selected effect sounds.
• Knob 3 (
EasyEd
) selects whether the program’s Easy Edit settings are applied to the
audition sound. Select
on
to apply the Easy Edit settings, or
off
to switch them
off
.
• Knob 4 (
NameView
) selects whether the screen displays the name of the sample
being played by the AUDITION key. Set to
enable
to display the name, or to
disable
to
suppress the display. If you set to
enable
, the name will appear on screen for about 1
second each time you play the audition.
• Knob 5 (
TrigMode
) sets the
AUDITION
key’s trigger mode. This parameter is equiva-
lent to Version 1’s AUDITION parameter (in Version 1’s
Keys
page). If you set the
mode to
normal
, the AUDITION key produces sound only while held down. If you set
the mode to
toggle
, each press of the key toggles audition playback on or off.
UTILITY - SYSTEM -
Page ☞
303
The
atModeChange
parameter at Knobs 2 and 3 now supports a new
HoldFunction
setting. If you select this setting, the mode keys and function keys will operate inde-
pendently – the function-key selection will no longer change automatically each time
you press a different mode key. As a result, you will be able to move to any point in the
matrix by pressing the corresponding mode and function keys in either order.
UTILITY - SYSTEM -
FreeMem
[Free Memory]
☞
304
This screen now both the free memory amount and the total memory amount. The
Wave(kB)
value shows free_wave_memory/total_wave_memory , and the
Param(kB)
value
shows free_parameter_ memory/total_ parameter_ memory .