Yamaha A3000, Руководство по модернизации

Страница: 37 / 50

Changes in UTILITY MODE
37
Chapter 2
Chapter 2 Upgrade Reference
Changes in UTILITY MODE
UTILITY - COMMAND Key -
CREATE_OSC
[Create Oscillators]
This is a new command. The command can be accessed from the UTILITY mode’s MAS-
TER function.
This command automatically generates the following seven “oscillator” samples: sine
wave , saw up , triangle , square , pulse 1 , pulse 2 , and pulse 3 . To execute the command,
push Knob 1.
Note that the command will not create any samples for which matching sample names
already exist.
UTILITY - PANEL PLAY -
KnobSet ☞
292
Parameter assignments for Knobs 3 to 5 have been rearranged: Knob 3 now sets the
Device
,
Knob 4 sets the controller enable (
Ctrl
), and Knob 5 sets the transmit channel (
T-ch
).
• On Version 1, the
Device
indication showed only the controller number. On Version 2,
it shows both the controller number and the corresponding device (if any). If you have
set up a knob to act as controller, then the knob name and transmit channel will both
appear next to the controller number (for example,
073/K4( 5)
would indicate that
Knob 4 is set to operate as Controller 073 transmitting over Transmit Channel 5).
• The
T-Ch
(transmit channel) parameter at Knob 5 can now be set to
AUDITION
. If
you set the value to
AUDITION
, the knob will act as a controller during audition
replay.
UTILITY - SEQUENCE -
SeqSel
[Select Sequence]
☞
296
Knob 5 now offers three operations:
>NEW
(create a new sequence; same as on Version
1),
>SAVE
(save the currently selected sequence), and
>DELETE
.(delete the currently
selected sequence). Turn the knob to select the operation, then push to execute.