Yamaha A3000, Руководство по модернизации

Страница: 10 / 50

Other New Features
10
Chapter 1 New Features
• Loop-start and loop-end addresses are now retained after resampling. (
→
28)
• A new “Copy Parameters” command lets you copy parameter settings from one sam-
ple or bank into another. (
→
29)
• Knob 5 of the EDIT | TRIM/LOOP
Wave
page now offers two operations:
EXTRACT
and
NORM
(normalize). (
→
30)
• The EDIT | MAP/OUT
KeyRnge
page now lets you set the low key or high key value so
that it is equivalent to (and locked to) the original-key setting. (
→
31)
• The velocity sensitivity parameter (at the Velocity Range page) now accepts settings
from -127 to +127 (up from -63 to +63 on Version 1). (
→
31)
• You can now select exponential conversion of incoming control-change values (where
Version 1 offered linear conversion only). (
→
33)
• The
Coarse
tune setting on the EDIT | MAP/OUT
Pitch
page is now also effective for
sample banks.
RECORDING Mode
• A level meter now appears on the “recording standby” and “recording-in-progress”
pages. (
→
34)
• A new PAUSE feature lets you temporarily pause operation when recording a series of
samples. (
→
34)
• You can set the A3000 to place your series of recorded samples into a single sample
bank. (
→
34)
• The REC | SETUP
KeyRnge
page includes a new
Map
parameter. If you set the param-
eter to
auto
, the A3000 will automatically map the recorded samples. (
→
35)
• The width parameter has been added to the recording effects page. (
→
35)
• The monitor on/off setting is now stored in nonvolatile memory, so that it is not lost
at power-off. (
→
35)
DISK Mode
• “Quick” formatting is now available for floppy disks. (
→
36)
• Names of samples, sequences, volumes, and imported files are now displayed alpha-
betically.