Yamaha A3000, Руководство по модернизации

Страница: 35 / 50

Changes in Recording Mode
35
Chapter 2
Chapter 2 Upgrade Reference
REC - SETUP -
KeyRnge
[Key Range]
☞
232
A new
Map
parameter is provided at Knob 2. This parameter selects the method used to
map newly recorded samples: either
manual
or
auto
.
If you select
manual
, you can then use Knob 3 to set the original key, and Knobs 4 and 5
to set the low and high keys. Note that the low and high key values can now also be set
to
=Orig
(sample’s original key). To set the low value to
=Orig
, turn Knob 4 all the way
to the left. To set the high value to
=Orig
, turn Knob 5 all the way to the right.
If you select
auto
, you can then use Knob 3 to set the original key. The A3000 then
automatically sets both the high and low keys equivalent to the original key, so that the
range consists of a single note.
If you record a series of samples under the
auto
setting, the A3000 automatically maps
the samples to successively higher keys on the keyboard. Use Knob 4 to select whether
samples are mapped to white keys only (
white
), or to all keys (
all
).
REC - EFFECT -
In&Out1
,
In&Out2 ☞
240
Version 1’s
In&Out
page has been renamed
In&Out1
, and a new
In&Out2
page has been
added.
You can use the new page to set the width for each recording effect.
Knob 3 sets the effect’s width (stereo expanse).
REC - MONITOR -
Monitor ☞
243
The A3000 now retains the
Monitor
setting (at Knob 5) in nonvolatile memory, so that
the value is no longer lost at power-off.