Yamaha 70 Скачать руководство пользователя | Manualshive

Страница: 8 / 94

background image

Safety information

2

EMU33820

Gasoline exposure and spills

Take care not to spill gasoline. If gasoline
spills, wipe it up immediately with dry rags.
Dispose of rags properly.
If any gasoline spills onto your skin, immedi-
ately wash with soap and water. Change
clothing if gasoline spills on it.
If you swallow gasoline, inhale a lot of gaso-
line vapor, or get gasoline in your eyes, get
immediate medical attention. Never siphon
fuel by mouth.

EMU33900

Carbon monoxide

This product emits exhaust gases which
contain carbon monoxide, a colorless, odor-
less gas which may cause brain damage or
death when inhaled. Symptoms include nau-
sea, dizziness, and drowsiness. Keep cock-
pit and cabin areas well ventilated. Avoid
blocking exhaust outlets.

EMU33780

Modifications

Do not attempt to modify this outboard mo-
tor. Modifications to your outboard motor
may reduce safety and reliability, and render
the outboard unsafe or illegal to use.

EMU33740

Boating safety

This section includes a few of the many im-
portant safety precautions that you should
follow when boating.

EMU33710

Alcohol and drugs

Never operate after drinking alcohol or tak-
ing drugs. Intoxication is one of the most
common factors contributing to boating fatal-
ities.

EMU33720

Personal flotation devices

Have an approved personal flotation device
(PFD) on board for every occupant. Yamaha

recommends that you must wear a PFD
whenever boating. At a minimum, children
and non-swimmers should always wear
PFDs, and everyone should wear PFDs
when there are potentially hazardous boat-
ing conditions.

EMU33730

People in the water

Always watch carefully for people in the wa-
ter, such as swimmers, skiers, or divers,
whenever the engine is running. When
someone is in the water near the boat, shift
into neutral and shut off the motor.
Stay away from swimming areas. Swimmers
can be hard to see.
The propeller can keep moving even when
the motor is in neutral. Shut off the engine
when a person is in the water near you.

EMU33750

Passengers

Consult your boat manufacturer’s instruc-
tions for details about appropriate passenger
locations in your boat and be sure all pas-
sengers are positioned properly before ac-
celerating and when operating above an idle
speed. Standing or sitting in non-designated
locations may result in being thrown either
overboard or within the boat due to waves,
wakes, or sudden changes in speed or direc-
tion. Even when people are positioned prop-
erly, alert your passengers if you must make
any unusual maneuver. Always avoid jump-
ing waves or wakes.

EMU33760

Overloading

Do not overload the boat. Consult the boat
capacity plate or boat manufacturer for max-
imum weight and number of passengers. Be
sure that weight is properly distributed ac-
cording to the boat manufacturers instruc-
tions. Overloading or incorrect weight
distribution can compromise the boats han-

«
...
6
7
8
9
10
...
»

Содержание 70































































































Отзывы:

Нет отзывов

Похожие инструкции для 70

SBC81206 Series

Бренд: AXIOMTEK Страницы: 74

Бренд: QDI Страницы: 69

Бренд: AOpen Страницы: 101

Бренд: Intel Страницы: 76

Бренд: IEI Technology Страницы: 205

Бренд: TYAN Страницы: 64

Бренд: Biostar Страницы: 166

SKR E3 DIP V1.0

Бренд: BIGTREETECH Страницы: 10

B560M DS3H PLUS

Бренд: Gigabyte Страницы: 42

Z370 AORUS Gaming 7

Бренд: Gigabyte Страницы: 48

dsPICDEM MCHV-3

Бренд: Microchip Technology Страницы: 68

Бренд: Ublox Страницы: 2

Бренд: Advantech Страницы: 5

Бренд: NXP Semiconductors Страницы: 4

CC85-CC2590EM Series

Бренд: Texas Instruments Страницы: 7

Бренд: AZZA Страницы: 61

Бренд: DFI Страницы: 105

Бренд: DFI Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды