Yamaha 70 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 94

background image

Safety information

4

go to boatus.org.

EMU33880

Passenger training

Make sure at least one other passenger is
trained to operate the boat in the event of an
emergency.

EMU33890

Boating safety publications

Be informed about boating safety. Additional
publications and information can be obtained
from many boating organizations.

EMU33590

Laws and regulations

Know the marine laws and regulations where
you will be boating- and obey them. Several
sets of rules prevail according to geographic
location, but all are basically the same as the
International Rules of the Road. The rules
presented in the following section are con-
densed- and have been provided for your
convenience only.
Contact the U.S. Coast Guard, the National
Association of State Boating Law Adminis-
trators, or your local Power Squadron for a
complete set of rules governing the waters in
which you will be using your boat.

EMU33680

Boating organizations

The following organizations provide boating
safety training and information about boating
safety and laws.

United States Coast Guard

Consumer Affairs Staff (G-BC)
Office of Boating, Public, and Consumer Af-
fairs
U.S. Coast Guard Headquarters
Washington, D.C. 20593-0001
Boating Safety Hotline: 1-800-368-5647
www.uscgboating.org

United States Power Squadrons

1-888-FOR-USPS (1-888-367-8777)
www.usps.org

Boat Owners Association of The United
States

1-800-336-BOAT (1-800-336-2628)
www.boatus.com

National Association of State Boating
Law Administrators (NASBLA)

1500 Leestown Road, Suite 330
Lexington, KY 4051 859-225-9497
859-225-9497
www.nasbla.org

National Marine Manufacturers Associa-
tion (NMMA)

200 East Randolph Drive
Suite 5100
Chicago, IL 606001
www.nmma.org

Marine Retailers Association of America

155 N. Michigan Ave. Chicago,
IL 60601
www.mraa.com

EMU33690

Basic boating rules (Rules of

the road)

Just as there are rules that apply when you
are driving on streets and highways, there
are waterway rules that apply when you are
driving your boat. These rules are used inter-
nationally. (For USA: and are also enforced
by the United States Coast Guard and local
agencies.) You should be aware of these
rules, and follow them whenever you en-
counter another vessel on the water.

«
...
8
9
10
11
12
...
»

Содержание 70































































































Отзывы:

Нет отзывов

Похожие инструкции для 70

Бренд: MSI Страницы: 96

Бренд: AKM Страницы: 45

Бренд: WIN Enterprises Страницы: 82

Бренд: Microchip Technology Страницы: 52

Бренд: C&T Solution Страницы: 65

Бренд: Aaeon Страницы: 120

Бренд: Sanela Страницы: 30

970A-G46 Series

Бренд: MSI Страницы: 78

Бренд: Vector Страницы: 73

Бренд: Microchip Technology Страницы: 35

Бренд: Texas Instruments Страницы: 19

Бренд: Gigabyte Страницы: 87

Бренд: IBASE Technology Страницы: 62

ADIS1650 PCBZSeries

Бренд: Analog Devices Страницы: 11

Бренд: Daewoo Страницы: 46

Бренд: Gigabyte Страницы: 23

Бренд: EVGA Страницы: 2

Бренд: ASROCK Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды