Yamaha 200A, Руководство по обслуживанию

Страница: 42 / 281

60H5E11
CHK
ADJ
Periodic checks and adjustments
3-7
Ignition timing at wide open throttle:
BTDC 18°
Timing light:
90890-03141
3. Check the ignition timing while engine is
running at wide open throttle (i.e. at fully
advanced position).
60H30140
Ignition timing at idle speed :
ATDC 7°
2. Check the ignition timing while engine is
running at idle speed.
60H30130
Make sure that the shift lever is in neutral
position.
Checking the ignition timing
1. Disconnect the throttle cable.
2. Remove the intake silencer and flywheel
cover.
3. Turn the flywheel clockwise until the igni-
tion timing mark on the flywheel magnet is
aligned with the pointer mark
A
on the tim-
ing plate at the full advance.
NOTE:
Turn the flywheel clockwise. Turning it to the
opposite direction will damage the water pump
impeller.
60H30150
4. Move the magnet control lever
1
until it
touches the full advanced stop screw 2 .
60H30160
Ignition timing (full advance):
BTDC 18°