Yamaha 2004 YP400, Руководство по обслуживанию, Страница: 382 / 417

8 - 38
– +
ELEC
SIGNALING SYSTEM
EAS00796
CHECKING THE SIGNALING SYSTEM
1. The horn fails to sound.
YES NO
YES NO
NO
YES
EAS00798
2. The tail/brake light fails to come on.
YES
NO
1. Horn switch
• Check the horn switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the horn switch OK?
Replace the left han-
dlebar switch.
2. Voltage
• Connect the pocket tester (DC 20 V) to the
horn coupler as shown.
Positive tester probe
→
brown
1
Negative tester probe
→
ground
• Set the main switch to “ON”.
• Measure the voltage (DC 12 V) of brown at
the horn coupler.
• Is the voltage within specification?
The wiring circuit
from the main switch
to the horn coupler is
faulty and must be
repaired.
Br
P
1
3. Horn
• Disconnect the horn coupler at the horn.
• Connect a jumper lead
1
to the brown ter-
minal in the horn coupler and the horn ter-
minal.
• Connect a jumper lead
2
to the horn ter-
minal and ground.
• Set the main switch to “ON”.
• Does the horn sound?
The wiring circuit
from the horn coupler
to the horn switch
coupler and/or horn
switch to ground are
faulty and must be
repaired. The horn is OK.
1. Tail/brake light LEDs
• Check the tail/brake light LEDs.
• Are the tail/brake light LEDs OK?
Replace the tail/
brake light assembly.
Br
P
1
2