Yamaha 2003 FJR1300, Руководство по обслуживанию

Страница: 146 / 162

– 138 –
– +
ELEC
IMMOBILIZER SYSTEM
Standard key registration:
When you lose a standard key and need a new one. Or when the code re-registering key is re-reg-
istered after the immobilizer unit or ECU, are replaced.
NOTE:
It is prohibited to start the engine with the standard key that is not registered.
If the main switch is turned “ON” with the standard key that is not registered, the immobilizer system
indicator light blinks and indicates the error code “52”.
(Refer to “SELF-DIAGNOSIS ERROR CODE INDICATION”).
1. Check that the immobilizer system indicator light is flashing. It indicates the “standby mode”. To
initiate the standby mode, turn “OFF” the main switch and then it will be the standby mode when
it passes 30 seconds. After 24 hours have passed, the indicator light stop flashing and the
standby mode ends.
2. After the main switch is turned “ON” with the code re-registering key, before 5 seconds elapses,
turn “OFF” the main switch and then turn “ON” the main switch with the standard key (the first
new key) that you want to register.
3. It enters the key registration mode and the two standard key codes that have been stored in the
memory are erased and the first new standard key code will be registered. At this time, the indi-
cator light rapidly blinks (“OFF” for 0.5 sec. and “ON” for 0.5 sec.).
4. In the condition as mentioned above (while the indicator light continues rapid flashing), after the
main switch is turned “ON” with the first new standard key, turn “OFF” the main switch before
5 seconds elapses, and then turn “ON” the main switch with the standard key that you want to
register (which is the second new key or the standard key remained in hand).
5. When the registration is finished, the indicator light goes off.
Standby mode
SWITCH
LED
STANDBY
MODE
ON
OFF
ON
OFF
ON
OFF