Yamaha 2003 FJR1300, Руководство по обслуживанию

Страница: 120 / 162

– 112 –
CHAS
ANTI-LOCK BRAKE SYSTEM (FJR1300A)
• Installing the rear wheel sensor
1. Install:
• rear wheel
NOTE:
• Align the slot
a
of the sensor housing
1
with the projection
b
of the rear brake cali-
per assembly
2
, and then assemble them.
• After installation, check that the projection
c
of the rear brake caliper assembly is inserted
into the slot
d
of the sensor housing.
CAUTION:
Make sure there are no foreign materials in
the wheel hub. Foreign materials cause
damage to the inner sensor rotor and rear
wheel sensor.
2. Install:
• rear wheel sensor
1
NOTE:
_
When installing the rear wheel sensor, check
the rear wheel sensor lead for twists and the
sensor electrode for foreign materials.
CAUTION:
_
To route the rear wheel sensor lead, refer to
“CABLE ROUTING”.
3. Connect:
• rear wheel sensor coupler
1
• rear wheel sensor lead holder
2
• clamp
3
CAUTION:
_
To route the rear wheel sensor lead, refer to
“CABLE ROUTING”.
4. Check:
• rear wheel sensor installation
Check if the wheel sensor housing is
installed properly. Refer to “[D-4] Mainte-
nance of the rear wheel sensor and sensor
rotor”.
T
R
.
.
30 Nm (3.0 m · kg)