Yamaha 02R, Руководство пользователя

Страница: 275 / 354

Digital I/O, Setup, and Utilities 165
Digital Recording Console 02R User’s Guide
Oscillator
Before starting a recording session, many engineers like to record a few
seconds of sine wave tones. These tones are used to compare the
performance of multitrack recorders when you take the master tapes from
one studio to another. This is especially important when the multitrack
recorder is analog. The 02R has an oscillator function that allows you to
send 100 Hz, 1 kHz, and 10 kHz sine waves and white noise to the
auxiliary and output buses and the stereo bus.
Display Screen
Shown below is the first UTILITY display function – the Oscillator screen:
Oscillator Functions
• ON/OFF – This icon is selected to turn the oscillator on or off. When
the oscillator is on, the Control Room DIM (mute) function is
automatically turned on.
• Level – This rotary icon allows you to set the oscillator output level. Set
the level from –96 dB to 0 dB. Watch the level meters to ensure you are
not driving the 02R into digital clipping.
• Wave Form – These icons allow you to select the wave form you want
output. The 02R can generate four different wave forms: “Sine 100Hz”,
“Sine 1kHz”, “Sine 10kHz”, and “Noise”.
• BUS Assign – Select the output buses 1 through 8.
• Stereo Assign – Select the stereo bus.
• Aux Assign – Select the auxiliary buses 1 through 8.
1. Press the [UTILITY] button.
A UTILITY display
function appears.
Press the [UTILITY ] button
repeatedly to get to the
“Oscillator” screen.
2. Use the CURSOR buttons
to select the ON or OFF
icon and press the
[ENTER] button.
3. Select the “Level”
control icon with the
CURSOR buttons. Rotate
the encoder wheel to set
the oscillator output
level.
4. Use the CURSOR buttons
to select the “Wave
Form” and press the
[ENTER] button.
5. Select the output
assignment icons with
the CURSOR buttons and
press the [ENTER] button
for each output.
UTILITY