Yamaha 02R, Руководство пользователя

Страница: 180 / 354

70 Dynamics
Digital Recording Console 02R User’s Guide
Patching in a Processor
DYNAMICS Icon
The DYNAMICS ON/OFF icon is used to turn the dynamics processor on
or off for the selected channel.
Control Prompts
The main control prompts are used to patch a dynamics processor into a
channel or stereo pair:
KEY IN selects the processor trigger source - the signal that triggers, or
activates the processor. You can select the current channel either before or
after equalization, the left channel (again either before or after
equalization), or either AUX 1 or AUX 2.
You cannot select the left channel (before or after equalization) for the first
input channel, MIC/LINE 1, the first tape return channel, TAPE 1, the first
bus channel, or the stereo output channel.
ST.LINK determines if a channel pair is to be linked together. You cannot
turn it off when the channel pair has been linked together with the PAIR
display function.
IN appears only when ST.LINK is set to ON. It determines whether a
dynamics processor is patched into just the left/odd channel (L),
right/even channel (R), or both (BOTH).
Prompt Value
KEY IN SELF - POST EQ, SELF - PRE EQ, LEFT - POST EQ,
LEFT - PRE EQ, AUX 1, AUX 2
ST.LINK ON, OFF
IN BOTH, L (left/odd), R (right/even)
Note: The DYNAMICS, KEY IN, ST.LINK, and IN parameters are not stored
in the dynamics programs. These are individual channel (or stereo pair) parameters
and are stored in the scene memories.
1. To turn the dynamics
processor on, use the
CURSOR buttons to
select the DYNAMICS
icon and press the
[ENTER] button.
The icon changes from
OFF to ON and is
highlighted in reverse
video.
2. Use the CURSOR buttons
to select the KEY IN
prompt and rotate the
encoder wheel or press
the [ENTER] button to
select a trigger source.
3. Use the CURSOR buttons
to select the ST.LINK
prompt and rotate the
encoder wheel or press
the [ENTER] button to turn
the stereo link on or off.
4. If the stereo link is on,
use the CURSOR buttons
to select the IN prompt
and rotate the encoder
wheel or press the
[ENTER] button to select
the channels to patch
the dynamics processor
into.