1033348-/15
Align the holes at sides
of the tubes.
9
• Squeeze one end of the
assembled connector
and insert into the open
end of a vertical tube.
• Slide the connector
into the tube until it
reaches the half-hole
at the midpoint of the
connector.
AsseMble veRTICAl
POles
10
CONNeCT veRTICAl
Tube AsseMblIes
11
ATTACh sTRuTs TO veRTICAl AsseMblIes
use This hole
For wAlls
wiTh sTuDs.
ATTACh WAll PlATes TO sTRuT Tubes*
• The convex bumps of the plate
go into the end of the top tube.
• Secure with plate screw.
*If you are using Universal Mounting Plate,
do not attach the wall plate to the tubes.
If your wall studs are not 32”
apart, you must use the Universal
Mounting Plate (#05103).
• Wrap the strut clamp
around the vertical poles
at midpoint.
• Grip strut end and secure
with washer, bolt and nut.
12
use this hole when
there is a universal
plate at the top wall
attachments, but not
at the struts.
