1033348-/15
Vertical Pieces
Foot Tubes (x2)
Top Tube (x2)
Plate Screw (x4)
Vertical Tube (x4)
Wall Screw (x12)
Wall Plate (x4)
Hooks (x4)
Strut Tubes (x2)
Side Tubes (x6)
Horizontal Tubes (x6)
Strut Clamp (x2)
Coupler (x12)
5/32” Hex Wrench
Foot (x2)
Vertical Connector (x2)
Vertical Sleeves (x8)
coupler sleeve
housing
(FooT pAD)
required tools
Power Drill
1/8” drill bit
Pen or Pencil
12’ tape measure
24” level
Stud Finder - for walls
with hidden studs
Horizontal Pieces
Horizontal Connectors (x12)
Stud Finder
Magnet-style stud finders
are an acceptable but
not desirable method of
finding studs since nails are
not always located in the
center of the stud. YAKIMA
recommends using an
electronic stud sensor that
uses density sensors. This
method is a faster and more
accurate way to find studs
and gives you a better sense
of the stud’s width.
