1033348-4/15
insert connectors into each end of side tube.
• Depress the connector peg and slide until the peg
clicks into the corresponding hole in the side tube.
(See figure).
• Slide horizontal tubes onto the connectors at both
ends of the side tube.
• Depress connector peg and slide until the peg
clicks into the corresponding hole on the horizontal
tube.
• Insert connectors into the ends of horizontal tubes.
• Slide a second side tube onto the ends of the
horizontal tubes to complete one hoop.
AsseMble hORIZONTAl hOOPs
Attach wall plates to top tubes
or use Mounting Plate
If your wall studs are not
32” apart, you must use
the Universal Mounting
Plate (#05103).
If you are using Universal
Mounting Plate, do not
attach the oval wall plate
to the top tube.
2
3
Assemble vertical sleeves onto top tubes.
4
Combine top tubes
to vertical tubes.
• Place the wall plate onto the threaded
end of the top tube, parallel to the tube.
• The convex bumps of the plate should go
into the end of the top tube.
• Secure with plate screw.
exTeNdeR KIT:
step 25 to add extensions.
CORNeR KIT:
step 34 for adding corners.
