Yaesu VR-5000, Руководство по эксплуатации

Страница: 52 / 64

VR-5000 O
PERATING
M
ANUAL
50
V
OICE
S
YNTHESIZER
O
PERATION
The optional Voice Synthesizer Unit ( FVS-1 ) enables an audible announcement of the
current (Main Band) operating frequency.
1. Press the [ F
] key momentarily, then press the [
V
(
DIM
)
] key to activate the Voice Syn-
thesizer Unit. The [ V
(
DIM
) ] key is the switch directly below the bottom right-hand
corner of the display.
2. When you press the [
V
(
DIM
) ] key again (or change the Main Band frequency), the
Voice Synthesizer will announce the current (Main Band) operating frequency.
3. To disable the Voice Synthesizer frequency announcements, press the [ F
] key momen-
tarily, then press the [ V
(
DIM
) ] key.
4. The audio monitoring level is controlled by the “
SUB VOL
” control, so advance the
setting of this knob if you do not hear the frequency announcements when the [ V
(
DIM
)
]
key is pressed.
D
IGITAL
V
OICE
R
ECORDER
The optional Digital Voice Recorder Unit (
DVS-4
) enables the recording of received sig-
nals for playback later in the loudspeaker or headphones. Under difficult conditions, this
may allow you to identify weak stations by repeatedly listening to the audio stream. You
may also wish to record “snippets” for later transfer to a tape recorder as a record of
stations heard.
Recording
1. Press the [
F
] key momentarily, then press the [
MODE
(
ADRS
) ] key.
2. Select the recording memory channel (“ DVR ch1 ” or “ DVR ch2 ”) by pressing the
[
MODE
(
ADRS
)
] key.
3. Press the [ F
] key momentarily, then press the [
COPY
(
REC
)
] key to start the recorder.
4. When you hear something you want to play back, press the [
F
] key momentarily, then
press the [
COPY
(
REC
) ] key again. This will stop the recording process, preserving
the last 8 seconds of incoming audio.
Notes:
• It is possible to record for a maximum of 16 seconds in the primary recording channel,
“ DVR ch1 .” If the recording time on this channel is 8 seconds or less, it is then possible
to record for a maximum of 8 seconds in the secondary recording channel, “ DVR ch2 .”
• If you record for more than 8 seconds in channel “
DVR ch1
,” the contents of recording
channel “ DVR ch2 ” will be erased.
• If you manually choose record in channel “ DVR ch2 ,” the last 8 seconds of the contents
of channel “ DVR ch1 ” will disappear.
Monitor
1. Press the [ F
] key momentarily, then press the [
MODE
(
ADRS
) ] key.
Miscellaneous Features