Yaesu VR-5000, Руководство по эксплуатации

Страница: 38 / 64

VR-5000 O
PERATING
M
ANUAL
36
M-S S
CAN
This feature allows you to sub-band limits scanning between the MAIN VFO frequency
and SUB VFO frequency.
1. Press the [ V/M
(
MW
)
] key to recall the VFO mode, if necessary.
2. Press the [
F
] key momentarily, then press the [
SCAN
(
M-S SCAN
) ] key to initiate
scanning in an upward direction between the MAIN VFO frequency and SUB VFO
frequency.
3. If the scanner encounters a signal strong enough to open the squelch, the scanner will
halt and pause on that frequency.
4. To reverse the direction of the scan (i.e. toward a lower frequency, instead of a higher
frequency), turn the
DIAL
knob one click in the counter-clock direction or press the
[ ( )]
key momentarily while the VR-5000 is scanning. To revert to scanning toward
a higher frequency once more, rotate the
DIAL
knob one click clockwise or press the
[ ( )]
key momentarily.
5. Press the [
SCAN
(
M-S SCAN
) ] key to disable the M-S Scan, and return to the VFO
mode.
Setting the dwell timers for the Scanner
You can customized the dwell timers for the Scanner.
1. Press the [
F
] key momentarily, then press the [
ENT
(
SET
)
] key.
2. Rotate the DIAL knob to select the cursor to the “ SCAN TM ” menu, then press the
[
ENT
(
SET
)
] key.
3. Rotate the DIAL knob to select the desired timer (menu) to be you wish changing.
M-DELAY : Determine the scan resume duration when signal is disappeared.
M-PAUSE : Determine the scanning pause time on activity before resuming.
M-P.DELAY : Determine the scan resume duration when the signal is disappeared while
the M-PAUSE timer is activated.
M-HOLD : Determine the scanning pause time when signal is received. If the scan-
ner stops until this time, the scanner turns to off.
M-H.DELAY : Determine the scan resume duration when the signal is disappeared while
the M-HOLD timer is activated.
4. Rotate the
DIAL
knob to change the value for the timer, then press the [
ENT
(
SET
)
]
key.
5. Rotate the
DIAL
knob to select the cursor to the “ END ” menu, then press the [
ENT
(
SET
)
]
key.
6. Confirm that the cursor is on the “ WRITE ” menu, then press the [
ENT
(
SET
) ] key to
save the new setting and exit to the normal operation.
Scanning