Yaesu VR-5000, Руководство по эксплуатации

Страница: 29 / 64

VR-5000 O
PERATING
M
ANUAL
27
To install a Memory Channel into the PMR Board:
1. Recall the memory channel which you wish to be monitoring for activity.
2. Press the [
F
] key momentarily, then press the [
3
(
S.SCH
)
] key.
3. The next-available PMR Board channel slot will be displayed, with an arrow alongside
it. Press the [ •
(
BEEP
)
] key to store the current channel.
4. Rotate the DIAL knob to set the cursor to the “
END
” menu selection, then press the
[
ENT
(
SET
) ] key.
5. Confirm that the cursor is on the “ WRITE ” menu selection, then press the [ ENT
(
SET
) ]
key to install the memory channel into the PMR Board.
6. Repeat steps 1 ~ 5 to install any other desired memory channels (up to 50 channels)
into the PMR Board.
To monitor the PMR Board:
Before commencing operation in this mode, be sure that the SQL control is set up so as to
quiet the background noise.
1. Press the [ F
] key momentarily, then press the [
4
(
SPL
)
] key.
2. Rotate the DIAL knob to set the cursor to the “
PMR Board
” menu selection, then press
the [ ENT
(
SET
)
] key.
3. The PMR Board will now be displayed as a matrix of channel squares. The “White”
squares indicate vacant channels, and Black squares indicate occupied channels.
4. Press the [ CLR
(
PRI CLR
) ] key, followed by the [
ENT
(
SET
) ] key, to return to the
Memory mode.
To delete a memory channel from the PMR Board:
1. Recall the Memory Channel mode.
2. Press the [
F
] key momentarily, then press the [
3
(
S.SCH
) ] key.
3. Rotate the DIAL knob to set the cursor to the memory channel which you wish to delete
from the PMR Board, then press the [ •
(
BEEP
) ] key.
4. Rotate the
DIAL
knob to select the cursor to the “ END ” menu, then press the [
ENT
(
SET
) ]
key .
5. Confirm that the cursor is on the “ WRITE ” menu, then press the [
ENT
(
SET
)
] key to
delete the memory channel from the PMR Board and return to the Memory mode.
Memory Operation