Yaesu FTdx5000MP, Руководство по эксплуатации

Страница: 96 / 148

Page 94 FT
DX
5000 O
PERATING
M
ANUAL
M
ESSAGE
M
EMORY
P
ROGRAMMING
(
U
SING YOUR
P
ADDLE
)
1. Set the operating mode to CW.
2. Set the [
BK-IN ] button to Off.
3. Turn the internal Electronic Keyer “on” by pressing
the [ KEYER
] button briefly, if necessary.
4. Press the FH-2 ’s [ MEM
] key.
5. Press the [ 1
] ~ [
5
] key on the
FH-2 to
begin the memory storage process.
6. Send the desired message using your keyer paddle.
7. Press the [
MEM
] key on the
FH-2 once
more at the end of your message. Up to
50 characters may be stored among the
five memories.
C
ONTEST
M
EMORY
K
EYER
The FT
DX
5000 in capable of the automatic sending of CW messages (as you might do in a contest) by plugging the
supplied FH-2 Remote Control Keypad into the rear panel REMOTE jack. Two techniques for message storage are avail-
able: you may either send the desired message contents using your keyer paddle (“
Message Memory
”), or you may input
the text characters using the (
VFO-A )[ SELECT ] knob and ( VFO-B )[ SELECT ] knobs (“
Text Memory ”).
MESSAGE Memory
Five memory channels capable of retaining 50 characters total are provided (using the PARIS standard for character and
word length).
Example : CQ CQ CQ DE W6DXC K (19 characters)
--
•
--
•
----
•
-- --
•
--
•
----
•
-- --
•
--
•
----
•
-- --
• • • •
------
• • • •
--
• •
--
• •
-- --
•
--
•
--
•
--
(C) (Q) (C) (Q) (C) (Q) (D) (E) (W) (6) (D) (X) (C) (K)
CW C
ONVENIENCE
F
EATURES
S
TORING A
M
ESSAGE INTO
M
EMORY
1. Press the [ MENU
] button briefly, to enter the Menu
mode.
2. Rotate the ( VFO-A
)[
SELECT
] knob to select the CW
Memory Register you wish to store the message into.
For now we are just selecting the message entry tech-
nique (Keyer entry).
025 KEY CW MEM1
026 KEY CW MEM2
027 KEY CW MEM3
028 KEY CW MEM4
029 KEY CW MEM5
3. Rotate the (
VFO-B )[ SELECT ] knob to set the selected
Memory Register to “
MESSAGE
”. If you want to use
your keyer paddle for message entry on all memories,
set all five Menu items (#025 ~ 029) to “
MESSAGE
”.
4. Press and hold in the [
MENU
] button for two seconds
to save the new settings and exit.
T
ERMINOLOGY
:
PARIS Word Length
: By convention in the Amateur
industry (utilized by ARRL and others), the length of one
“word” of CW is defined as the length of the Morse Code
characters spelling the word “PARIS.” This character (dot/
dash/space) length is used for the rigorous definition of
code speed in “words per minute.”
(VFO-B)[SELECT] Knob [MENU] Button
(VFO-A)[SELECT] Knob
LOCK
OFF ON
LOCK
OFF ON
LOCK
OFF ON
N
OTE
:
You must exercise care in sending to ensure that the
spaces between letters and words are accurately done.
If your timing is off, the spacing may not come out
right in the stored message.
For ease in setting up the keyer memories, we recom-
mend you set Menu item “
057 A1A F-TYPE ” and/or
“
059 A1A R-TYPE
” to “
ACS
” (Automatic Character
Spacing) while you are programming the keyer memo-
ries.