Yaesu FTdx5000MP, Руководство по эксплуатации

Страница: 136 / 148

Page 134 FT
DX
5000 O
PERATING
M
ANUAL
M
ENU
M
ODE
TX AUDIO G
ROUP
151 TAUD EQ1 FRQ
Function
: Selects the center frequency of the lower range
for the parametric microphone equalizer.
Available Values : OFF / 100Hz ~ 700Hz (100 Hz/step)
Default Setting : OFF
OFF: The equalizer gain and Q-factor are
set to factory defaults (flat).
100Hz ~ 700Hz: Center frequencies of 100 Hz ~ 700
Hz. You may adjust the equalizer
gain and Q-factor at this selected
audio frequency via menu items
“152 TAUD EQ1 LVL” and “153
TAUD EQ1 BW”.
152 TAUD EQ1 LVL
Function : Adjusts the equalizer gain of the low range of
the parametric microphone equalizer.
Available Values : –20 ~ 10
Default Setting
: 5
153 TAUD EQ1 BW
Function
: Adjusts the Q-factor of the low range of the
parametric microphone equalizer.
Available Values : 1 ~ 10
Default Setting : 10
154 TAUD EQ2 FRQ
Function : Selects the center frequency of the middle
range for the parametric microphone equalizer.
Available Values : OFF / 700Hz ~ 1500Hz (100 Hz/step)
Default Setting
: OFF
OFF: The equalizer gain and Q-factor are
set to factory defaults (flat).
700Hz ~ 1500Hz: Center frequencies of 700 Hz ~
1500 Hz. You may adjust the equal-
izer gain and Q-factor at this se-
lected audio frequency via menu
items “155 TAUD EQ2 LVL” and
“156 TAUD EQ2 BW”.
155 TAUD EQ2 LVL
Function
: Adjusts the equalizer gain of the middle range
of the parametric microphone equalizer.
Available Values
: –20 ~ 10
Default Setting : 5
156 TAUD EQ2 BW
Function : Adjusts the Q-factor of the middle range of
the parametric microphone equalizer.
Available Values : 1 ~ 10
Default Setting
: 10
150 TUN MY BAND
Function : Programs a band to be skipped while selecting
bands using the [ CLAR
(
VFO-B
)] knob.
Available Values : 1.8M ~ 50M / GEN / T14M / T28M /
T50M
Default Setting : 1.8M ~ 50M / GEN: ON,
T14M / T28M / T50M: OFF
To program the band to be skipped, rotate the (
VFO-
B
)[
SELECT
] knob to recall the band to be skipped while
selecting bands via the [ CLAR
(
VFO-B
)] knob, then press
the [
ENT
] key (one of the [
BAND
] buttons) to change this
setting to “OFF”. Repeat the same procedures to cancel the
setting (change the “OFF” notation to “ON”).
TUNING G
ROUP