Yaesu FTdx5000MP, Руководство по эксплуатации

Страница: 28 / 148

Page 26 FT
DX
5000 O
PERATING
M
ANUAL
[
CLAR/GRP
]
Switch
This button has two functions.
Press this button briefly , the [
CLAR/VFO-B
] knob
will be enabled as an “offset tuning” control to allow
tuning away from the VFO-A frequency, and the
[
CLAR/GRP ] button will glow red.
Pressing and holding this button for one second
, al-
lows you to select the memory group using the
[
CLAR
(
VFO-B
)] knob, and the [
CLAR/GRP
] but-
ton will glow yellow.
[
BAND
(
MCH
)]
Switch
This button has two functions.
Pressing this button briefly
, enables the [
CLAR
(
VFO-
B
)] knob to select the VFO-A operating Amateur Band.
The [
CLAR/GRP
)] button glows red.
Pressing and holding this button for one second , al-
lows you to select the memory channel using the
[
CLAR
(
VFO-B
)] knob, and the [
CLAR/GRP
] but-
ton is glows yellow.
[
A/B
]
Switch
This button switches the actions of the [ CLAR
(
VFO-
B
)] knob between VFO-A and VFO-B.
Pressing this button once causes the button to glows
yellow; in this case, rotation of the [
CLAR
(
VFO-B
)]
knob affects operation on VFO-B (tuning, etc.). Press-
ing this button once more causes the button to turn off;
in this instance, rotation of the [
CLAR
(
VFO-B
)] knob
affects operations associated with the VFO-A (Clari-
fier function, etc.).
(
VFO-B
)[
RX
]
Indicator/Switch
This is the button that turns the VFO-B receiver “On”
and “Off”. When the VFO-B receiver is active, the
button will glow green. Pressing this button again will
disable VFO-B receiver, and the imbedded green LED
will turn off. Press and hold in this button for two sec-
onds to activate the VFO Traking feature.
(
VFO-B
)[
TX
]
Indicator/Switch
This button turns the VFO-B transmitter “On” and
“Off”. When this button is pressed, it will glow red
and VFO-B will control the transmitter frequency and
mode. Pressing this button once more will transfer fre-
quency/mode control back to VFO-A, and the red LED
in the button will turn off.
[
CLAR
(
VFO-B
)]
Knob
The function of this knob differs according to the set-
tings of the three switches located above the knob. See
the next page for details.
SUB DISPLAY- II
This OLED (Organic Light Emitting Diode) display
shows the characteristics of the VFO-A receiver DSP
functions selected by five of the buttons located below
of this display. The (
VFO-A
)[
SELECT
] knob located
below this window is an adjustment knob for the func-
tion displayed in this window. Alternately, when the
Menu Mode is activated, this OLED displays the se-
lected Menu item.
F
RONT
P
ANEL
C
ONTROLS
& S
WITCHES