Yaesu FTdx5000MP, Руководство по эксплуатации

Страница: 82 / 148

Page 80 FT
DX
5000 O
PERATING
M
ANUAL
Checking Your Recording
1. Be sure that the front panel [ MOX
] and [
VOX
] but-
tons are both “Off” (the LED imbedded in the button
must be off).
2. Press the FH-2 ’s [ 1
] ~ [
5
] key (whichever one you just
recorded in), and you will hear the contents of the voice
memory you just recorded.
A
DVICE
:
You may adjust the playback level of the recording via
Menu item “
020 DVS RX LVL ”.
Transmitting the Recorded Message
1. Select the LSB, USB, AM, or FM mode using the front
panel [ MODE
] buttons.
2. Press the front panel [ BK-IN
] button briefly.
3. Press the
FH-2
’s [
1
] ~ [
5
] key, depending on which
memory register message you wish to transmit. If you
hit the key again during playback, the message will be
terminated.
A
DVICE
:
You may adjust the transmit (audio) level of the recording
via Menu item “
021 DVS TX LVL
”.
LOCK
OFF ON
LOCK
OFF ON
V
OICE
M
EMORY
(
SSB/AM/FM M
ODES
)
You may utilize the Voice Memory capability of the FT
DX
5000 by plugging in the supplied FH-2 Remote Control Keypad
into the rear panel REMOTE jack.
The Voice Memory system includes five memories capable of storing up to 20 seconds of voice audio each. The maximum
that any memory can hold is 20 seconds.
Recording Your Own Voice in Memory
1. Select the LSB, USB, AM, or FM mode using the front
panel [ MODE
] buttons.
2. Press the [
MEM
] key on the
FH-2
briefly. A blinking
“ ” icon will appear in the display
3. Press any of the FH-2 ’s keys numbered [ 1
] through
[
5
] to select that memory storage register. If you do
not press the
PTT
key (see next step) within five sec-
onds, the memory storage process will be cancelled.
4. Press the microphone’s PTT switch briefly, the
“ ” icon will glow steadily, and recording will
begin.
5. Speak into the microphone in a normal voice level to
record the message (such as “CQ DX, CQ DX, this is
W 6 Delta X-Ray Charlie, W 6 Delta X-Ray Charlie,
Over”). Remember that the time limit for recording
any message is 20 seconds.
6. Press the FH-2 ’s [ MEM
] key to terminate the message
storage process.
T
RANSMITTER
C
ONVENIENCE
F
EATURES
LOCK
OFF ON
LOCK
OFF ON