Yaesu FTdx5000MP, Руководство по эксплуатации

Страница: 39 / 148

Page 37 FT
DX
5000 O
PERATING
M
ANUAL
Before turning on main power, please verify the following precautions once more.
Verify all ground connections are secure. See page 9 for details.
Connect the antenna(s) to the rear-panel Antenna jack(s). See page 10 for details.
Connect the microphone (and/or key or paddle). See pages 11 and 12 for details.
If using a linear amplifier, verify the interconnections have been successfully completed? See pages 13 and 14 for
details.
Rotate both [ AF GAIN
] controls to their fully counter-clockwise positions, to avoid a loud blast of audio when the
transceiver turns on. See page 21 for details.
Rotate the [ RF PWR
] control fully counter-clockwise, to set minimum power to begin. See page 20 for details.
If your AC mains power should suffer a significant fluctuation or interruption, we recommend that you go through a
complete power-up cycle, in order to ensure that all circuits are properly initialized. To do this, be sure the front panel
[
POWER
] switch is turned off, then set the rear panel main power switch to the “
O
” position. Now unplug the AC
cable from the rear panel, and wait ten seconds before continuing with the start-up procedure described on the next
page.
B
ASIC
O
PERATION
:
R
ECEIVING ON
A
MATEUR
B
ANDS