Yaesu FTdx5000MP, Руководство по эксплуатации

Страница: 26 / 148

Page 24 FT
DX
5000 O
PERATING
M
ANUAL
[
A B
]
Switch
Press this button briefly to transfer data from the VFO-
A frequency (or a recalled memory channel) to VFO-
B, overwriting any previous contents in VFO-B. Use
this button to set both VFO-A and VFO-B receivers to
the same frequency and mode.
[
A B
]
Switch
Pressing this button briefly, exchanges the contents of
the VFO-A (or a recalled memory channel) and the
VFO-B.
[
V/M
]
Switch
This button toggles VFO-A receiver operation between
the memory system and the VFO. Either “
” or
“ ” will be displayed under the main frequency
display field to indicate the current selection. If you
have tuned off of a Memory channel frequency (MT),
pressing this button returns the display to the original
memory contents (MR), and pressing it once more re-
turns operation to VFO-A (no icon).
[
M A
]
Switch
Press this button briefly, to display the contents of the
currently-selected memory channel for three seconds.
Holding this button in for 2 seconds copies the data
from the currently-selected memory to VFO-A, as two
beeps sound. Previous data in VFO-A will be over-
written.
[
A M
]
Switch
Pressing and holding in this button for 1/2 second (un-
til the double beep), copies the current operating data
from VFO-A into the currently selected memory chan-
nel, overwriting any previous data stored there. See
page 102 for details.
Also, pressing and holding in this button after recall-
ing a memory, without first retuning, causes the memory
channel to be “masked,” and repeating the process re-
stores the masked memory.
[
MENU
]
Switch
This button is used to access the Menu system, for con-
figuring various transceiver characteristics. Menu op-
eration is described in detail, in this manual, begin-
ning on page 116.
I
MPORTANT
N
OTE
:
Pressing this button briefly activates the Menu, and
the Menu items will appear on the
SUB DISPLAY
windows. Once you are finished, you must press and
hold in the [
MENU
] button for two seconds to save
any configuration changes (briefly press the [
MENU
]
button to exit without saving the changes).
F
RONT
P
ANEL
C
ONTROLS
& S
WITCHES