Yaesu FT DX 9000MP CONTEST - DATA MANAGEMENT..., Руководство по эксплуатации

Страница: 58 / 180

Page 56 FT
DX
9000MP O
PERATION
M
ANUAL
“M
Y
B
ANDS
” O
PERATION
When operating on an Amateur Band on the Main (VFO-A) register, it is possible to use the [ BAND/MHz
] switch to
engage the use of the [
CLAR/VFO-B
] knob for Amateur band selection. The “My Bands” feature allows you to select
several Amateur bands, and make only those bands available for selection via the [ CLAR/VFO-B
] tuning knob.
This feature can be very useful in a contest, where the 10/18/24 MHz band are not used, or if you do not have antennas for
some bands.
“M
Y
B
ANDS
” S
ETUP
1. Press the [ MNU
] key to engage the Menu mode; the
Menu list will appear on the LCD Display.
2. Rotate the [
MAIN Tuning Dial
] knob to select Menu
item “ TUNING 145 MY BAND ”.
3. Rotate the [ CLAR/VFO-B
] knob to choose a band
that you wish to skip (omit) from the band-selection
loop (when using the [
CLAR/VFO-B
] tuning knob
for band selection). The available choices are 1.8/3.5/
7/10/14/18/21/24/28/50/GEN/TRV, and the factory-
default selection is TRV (only).
4. Press the [ ENT
] key to set the omission command to
ON.
5. Repeat steps 3 and 4 to select/deselect as many bands
as you like.
N N
N N
N
O O O O OTE TE TE TE TE
:
The “ON” command sets the selected band to be
skipped, while the “OFF” command sets the selected
band to be included in the band-selection list.
6. Press and hold in the [ MNU
] key for two seconds to
lock in the new configuration and exit to normal op-
eration.
[MAIN Tuning Dial] Knob
[MNU] Key [ENT] Key
1.8MHz
3.5
7
10
14
18
21
24
28
50
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
TRV
GEN
3.5
7
14
21
28
MHz
MHz
MHz
MHz
MHz
3.5MHz
7MHz
14MHz
21MHz
28MHz
[CLAR/VFO-B] Knob
CCCCC
ONVENIENT ONVENIENT
ONVENIENT ONVENIENT
ONVENIENT
F F F F F
EA EA
EA EA
EATURES TURES
TURES TURES
TURES
[BAND/MHz] Switch
VDD TEMP SWR BIAS
LCD Display
“M
Y
B
ANDS
” O
PERATION
1. Press the [ BAND/MHz
] switch; the imbedded LED
will glow Red.
2. Rotate the [
CLAR/VFO-B
] knob to choose the Ama-
teur band on which you wish to operate. Only those
Amateur bands that have not been skipped will ap-
pear as you scroll through the bands.